Seagate ST1.3 ST1.3 Series Product Manual - Page 10

Table 1: Specifications Drive specification Read/write power (typical 3.3V) Performance idle mode (typical 3.3V) Low power idle mode (typical 3.3V) Standby/Sleep mode (typical 3.3V) Voltage tolerance (including noise) Ambient temperature Temperature gradient (°C per hour max) Relative humidity (noncondensing) Relative humidity gradient Wet bulb temperature (°C max) Altitude, operating Altitude, nonoperating (below mean sea level, max) Shock, operating (Gs max at 1 msec) Shock, nonoperating (Gs max at 1 msec) Vibration, operating (max displacement may apply below 10 hz) Vibration, nonoperating (max displacement may apply below 22 hz) Drive acoustics, sound power (bels) Idle (typical / max) Operational (typical / max) Nonrecoverable read errors Load/Unload (LUL) cycles (25°C) Warranty ST612712DEG ST610712DEG ST680712DEG ST660712DEG ST612712DE ST610712DE ST680712DE ST660712DE 230/240 mA 140 mA 77 mA 13 mA 3.3V ± 5% 0° to 60°C (operating) -40° to 70°C (nonoperating) 20°C (operating) 30°C (nonoperating) 5% to 90% (operating) 5% to 95% (nonoperating) 30% per hour max 33°C (operating) 40°C (nonoperating) -60.98 m to 3,048 m (-200 ft to 10,000+ ft) -60.98 m to 12,192 m (-200 ft to 40,000+ ft) 300 2000 1.0 Gs (0 to peak, 10-500 Hz) @ 2 oct/min sweep rate 5.0 Gs (0 to peak, 10-500 Hz) @ 0.5 oct/min sweep rate 1.6/ 1.9 1.7 / 2.0 1 per 1014 bits read 300,000 software-controlled power on/off cycles 20,000 hard power on/off cycles Per agreement 4 ST1.3 Series Product Manual, Rev. D