Seagate ST3000DM001 Barracuda SATA Product Manual - Page 12
Barracuda SATA Product Manual, Rev. B, Drive Specifications, ST3500413AS, ST31000524AS, ST3750525AS
View all Seagate ST3000DM001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Drive Specifications www.seagate.com Table 1 Drive specifications summary for 1000 and 750 models (continued) Drive Specification ST31000524AS ST3750525AS Startup current (typical) 12V (peak) Voltage tolerance (including noise) Ambient temperature Temperature gradient Relative humidity Relative humidity gradient (max.) Wet bulb temperature (max.) Altitude, operating Altitude, non-operating (below mean sea level, max) Operational Shock (max) Non-Operational Shock (max) Vibration, operating Vibration, non-operating Drive acoustics, sound power Idle** Seek Non-recoverable read errors Annulized Failure Rate (AFR) Warranty Contact start-stop cycles Supports Hotplug operation per the Serial ATA Revision 2.5 specification 2.0A 5V +10% / -7.5% 12V +10% / -7.5% 0° to 60°C (operating) -40° to 70°C (non-operating) 20°C per hour max (operating) 30°C per hour max (non-operating) 5% to 95% (operating) 5% to 95% (non-operating) 30% per hour 37.7°C max (operating) 40.0°C max (non-operating) -304.8m to 3,048m (-1000 ft to 10,000+ ft) -304.8m to 12,192m (-1000 ft to 40,000+ ft) 70 Gs at 2ms 300 Gs at 2ms 2Hz to 22Hz: 0.25 Gs, Limited displacement 22Hz to 350Hz: 0.50 Gs 350Hz to 500Hz: 0.25 Gs 5Hz to 22Hz: 3.0 Gs 22Hz to 350Hz: 3.0 Gs 350Hz to 500Hz: 3.0 Gs 2.0A 5V +10% / -7.5% 12V +10% / -7.5% 0° to 60°C (operating) -40° to 70°C (non-operating) 20°C per hour max (operating) 30°C per hour max (non-operating) 5% to 95% (operating) 5% to 95% (non-operating) 30% per hour 37.7°C max (operating) 40.0°C max (non-operating) -304.8m to 3,048m (-1000 ft to 10,000+ ft) -304.8m to 12,192m (-1000 ft to 40,000+ ft) 70 Gs at 2ms 300 Gs at 2ms 2Hz to 22Hz: 0.25 Gs, Limited displacement 22Hz to 350Hz: 0.50 Gs 350Hz to 500Hz: 0.25 Gs 5Hz to 22Hz: 3.0 Gs 22Hz to 350Hz: 3.0 Gs 350Hz to 500Hz: 3.0 Gs 2.6 bels (typical) 2.7 bels (max) 2.6 bels (typical) 2.7 bels (max) 2.8 bels (typical) 3.0 bels (max) 1 per 1014 bits read 2.8 bels (typical) 3.0 bels (max) 1 per 1014 bits read 0.34% 0.34% To determine the warranty for a specific drive, use a web browser to access the following web page: support.seagate.com/customer/warranty_validation.jsp From this page, click on the "Verify Your Warranty" link. You will be asked to provide the drive serial number, model number (or part number) and country of purchase. The system will display the warranty information for your drive. 50,000 at 25°C, 50% rel. humidity 50,000 at 25°C, 50% rel. humidity Yes Yes *One GB equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment and formatting. **During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and power to operational levels. Table 2 Drive specifications summary for 500GB and 320 models Drive Specification ST3500413AS Formatted capacity (512 bytes/sector)* 500GB Guaranteed sectors 976,773,168 Heads 2 Disks 1 Bytes per sector 512 Default sectors per track 63 Default read/write heads 16 Default cylinders 16,383 ST3320413AS 320GB 625,142,448 2 1 512 63 16 16,383 12 Barracuda SATA Product Manual, Rev. B