Sharp 27C540 27C540 Operation Manual - Page 31
Press, to exit., When the BLUE SCREEN is set to
View all Sharp 27C540 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Set Up (Continued) 6 Press MENU to exit. When the BLUE SCREEN is set to "ON" No signal Blue screen Power turns off automatically after 15 minutes Standby mode Note: • Poor reception due to weak signals, or too much noise might activate the BLUE SCREEN function despite the presence of a broadcast signal. To continue watching TV under these conditions, switch the BLUE SCREEN "OFF". • While INPUT 1, 2, or 3 (COMPONENT) is selected, the BLUE SCREEN will not be shown even if BLUE SCREEN is turned on. 31
31
6
Press
MENU
to exit.
When the BLUE SCREEN is set to “ON”
Note:
•
Poor reception due to weak signals, or too much noise might activate the BLUE SCREEN function
despite the presence of a broadcast signal. To continue watching TV under these conditions, switch
the BLUE SCREEN “OFF”.
•
While INPUT 1, 2, or 3 (COMPONENT) is selected, the BLUE SCREEN will not be shown even if
BLUE SCREEN is turned on.
Set Up (Continued)
No signal
after 15
minutes
Power turns off
automatically
Blue screen
Standby mode