Sharp 27F640 Operation Manual - Page 8

Quick Reference Control Operation (Continued) • Part Names Basic Remote Control Functions POWER Press → On. Press again → Off. REMOTE KEYPAD Accesses any channel from keypad. Infrared Transmitter Window CATV/DVD-TV/VCR MODE buttons Press TV/VCR → Signals sent will be for TV and VCR control. Press CATV/DVD → Signals sent will be for cable TV converter and DVD control. FLASHBACK Returns to previous channel. PERSONAL PREFERENCE With the Personal Preference buttons, you can program your favorite programs by using the 4 categories A, B, C and D. The channels can be accessed quickly by using these buttons. (See page 33.) VOLUME UP/DOWN (k) Increases sound. (l) Decreases sound. • Changes or selects the TV adjustments on On-Screen Display. MENU Press → Accesses MAIN MENU. Press again → Exits MAIN MENU. MUTE Press → Mutes sound. Press again → Restores sound. • When sound is muted, CLOSED CAPTION appears if available. POWER (DVD/VCR) Press → On. Press again → Off. DVD/VCR CONTROL (See page 42.) DISPLAY Press → Displays receiving channel for 4 seconds. Press again → Removes display. • Temporarily displays receiving channel when in Closed Caption mode. INPUT Press → Switches to external video INPUT 1 mode. Press twice → Switches to external video INPUT 2 mode. Press 3 times → Switches to external video INPUT 3 mode or COMPONENT mode. Press 4 times → Switches back to the original TV mode. (See page 40.) ENTER Used in some instances where a Cable Converter Box requires an "enter" command after selecting channels, when using the REMOTE KEYPAD button. (See page 42.) CHANNEL UP/DOWN (a) Selects next higher channel. (s) Selects next lower channel. • See pages 29-31 for Channel Setting. • Moves the "E" mark on the MENU screen SKIP/VCR-CH (See page 42.) REC (See page 42.) LIGHT Press → All the shaded operation buttons will light up. At the same time, the selected MODE button, either CATV/DVD or TV/ VCR will flash. Note: • The LIGHT button on the Remote Control glows in the dark. To use the glow-in-the-dark display on the remote control, place it under a fluorescent light or other lighting. • When the LIGHT button is pressed, the shaded buttons above will light up. • Using the LIGHT button frequently will shorten the battery life. • Alkaline batteries are recommended for frequent use of the LIGHT button. • The phosphorescent material contains no radioactive or toxic material, so it is safe to use. • The degree of illumination will vary depending on the strength of lighting used. • The degree of illumination will decrease with time and depending on the temperature. • The time needed to charge the phosphorescent display will vary depending on the surrounding lighting. • Sunlight and fluorescent lighting are the most effective when charging the display. 8