Sharp 27NS50 27NS50 Operation Manual - Page 24

Parent Control (VIEW TIMER Continued) 9 Enter the 4-digit SECRET No. using the REMOTE KEYPAD. 10Press MENU, and SECRET No. is registered. → Example: • To restrict anybody from watching the TV for 5 hours, after watching the TV for 2 hours, your settings would look like this: • They can choose to watch the 2 hours of TV however they wish. For example, they could watch 1 hour of TV, turn TV off for 30 minutes, then turn TV on and watch the remaining 1 hour on the VIEWING TIMER. L To change the VIEW TIMER settings. (SECRET No. is registered) 1 Repeat "How to set VIEW TIMER" steps and select "PARENT CONTROL VIEW TIMER" during step 3. Press VOL (+) or (-), and "INPUT SECRET No." will be displayed. 2 Enter the 4-digit SECRET No. using the REMOTE KEYPAD, and the VIEW TIMER access screen will be displayed. Repeat step 5 - 6. NOTE: • When you choose the correct SECRET No., the VIEW TIMER access screen is displayed. If the wrong SECRET No. is chosen, "SECRET No. IS INCORRECT" is displayed. Input the SECRET No. again in this case. L To cancel the VIEW TIMER (While the TV set is OFF but the VIEW TIMER is set) 1 Turn on TV; a blue screen message "TIME OVER" will appear. If you do nothing, the TV will turn off in approximately 30 seconds. 2 Enter the 4-digit SECRET No. using the REMOTE KEYPAD. When you choose the correct SECRET No., the VIEW TIMER is canceled. If the wrong SECRET No. is chosen, "SECRET No. IS INCORRECT" is displayed. Input the SECRET No. again in this case. L To cancel the VIEW TIMER setting or change the SECRET No. (When you forget the SECRET No.) 1 Repeat "How to set VIEW TIMER" steps and select "PARENT CONTROL VIEW TIMER" during step 3. Press VOL (+) or (-), and "INPUT SECRET No." will be displayed. 24 19-25 27N-S50 24 6/1/00, 11:43 AM