Sharp AL 1651CS AL-1651CS AL-1661CS Operation Manual - Page 18
Power On And Off - model
UPC - 074000074590
View all Sharp AL 1651CS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
POWER ON AND OFF The power switch is located on the left side of the machine. Warning If you use the machine in a country other than the country where the machine was purchased, you will need to make sure that your local power supply is compatible with your model. If you plug the machine into an incompatible power supply, irreparable damage to the machine will result. Power on Turn the power switch to the "ON" position. The ready indicator will light up and other indicators which show the initial settings of the display will also light up to indicate the ready condition. For the initial settings, see the "Initial settings" (below). You can select copy settings and press the [START] key ( ) during warm-up. Copying will start after warm-up. Only insert the power cord into a properly grounded wall socket. Caution Do not use extension cords or power strips. The first time the power is turned on after shipment from the factory, a message will appear in the display asking you to select the language. Select the language with the [ ] key ( ) or [ ] key ( ) and then press the [ENTER] key. Initial settings The machine reverts to the initial settings when it is first turned on, when the [CLEAR ALL] key ( ) is pressed, or when no keys are pressed for the preset "AUTO CLEAR" time following the end of a copy job. When the machine reverts to the initial settings, all settings and functions selected to that point are canceled. The "AUTO CLEAR" can be changed in the user programs. (p.64) When in the copy mode AL-1651CS READY TO COPY 100% 8.5x11 0 The main screen of copy mode appears. Copy ratio: 100%, Exposure: Automatic Copy quantity: 0, All special copier modes: Off 16