Sharp AL 1651CS AL-1651CS AL-1661CS Operation Manual - Page 74
Troubleshooting And Maintenance - system error
UPC - 074000074590
View all Sharp AL 1651CS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
TROUBLESHOOTING AND MAINTENANCE Indication Lamp indicator Display Cause and remedy Page REPLACE THE Blinks DRUM CARTRIDGE. The drum cartridge has reached the end of its life. Replace it with a new drum cartridge. (When the indicator blinks, the 86 machine does not operate.) Error indicator TD CARTRIDGE Toner is low. Consult your dealer to IS NEAR EMPTY. purchase a new toner cartridge. 85 Steadily A DRUM Less than 1000 sheets can be printed lit CARTRIDGE WILL with the current drum cartridge. BE NEEDED Consult your dealer to purchase a new 86 SOON. drum cartridge. MEMORY FULL, PRESS START TO Data is being held in memory. Print the 34 RESUME. data or clear it from memory. 37 NO 2-SIDED COPY FROM BYPASS Two sided printing or 2 IN 1 copying is TRAY. NO 2IN1 COPY FROM BYPASS TRAY. selected when the bypass tray is already selected ,or the bypass tray is selected when two-sided printing or 2 30 35 IN 1 copying is already selected. NO 2IN1 COPY WITH MARGIN SHIFT. 2 in 1 copy and margin shift are both 35 enabled. 38 COPY RATIO CAN NOT BE CHANGED IN 2IN1. 2 in 1 copy and reduce/enlarge copy 28 are both enabled. 35 THIS MENU IS NOT SELECTABLE WITH DATA. This appears if you attempt to change a user program setting while a copy or 64 print job is in progress. INSTALL A TD CARTRIDGE. The TD cartridge is not installed correctly. Reinstall the TD cartridge. 85 NO *** SIZE TRAY There is no paper for printing. Press the [MODE SELECT] key to switch to printer mode and follow the instructions in the display. ("***" indicates paper size) CHECK SPF/RSPF. START TO RESUME. An original remains on the document glass. 24 Printing stops if the tray's paper size setting is different from the paper size LOAD **** PAPER INTO TRAY. setting in the printer driver. Make sure that the settings are the same and then press the [CLEAR] key ( ) or the 19 [CLEAR ALL] key ( ). Repeat the print procedure. ("****" indicates paper size) NO PC COMMUNICATION; CHECK CABLE. The machine is not correctly connected to the computer. Check the cable (when using the scanner function). 46 47 72