Sharp AR-207 AR-207 Operation Manual - Page 13
Changing the copy paper size in the tray
View all Sharp AR-207 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
LOADING COPY PAPER GETTING STARTED Loading copy paper Left guide Changing the copy paper size in the tray 1 Gently lift and pull out the paper tray until it stops. 2 Push the pressure plate down until it locks in place. 3 Squeeze the lock lever of the front guide and slide the front guide to match the width of the paper. Front guide 4 Move the left guide to the appropriate slot as marked on the tray. q When using 5-1/2" x 8-1/2" copy paper, load it into the uppermost paper tray. If other trays (including trays in optional paper feed units) are used, paper misfeeds may occur. q When using 11" x 17" copy paper, store the left guide in the slot at the left front of the paper tray. 5 Load copy paper into the tray. 6 Place the appropriate label to indicate the selected paper size into the recess on the right front side of the paper tray. 7 Push the paper tray firmly back into the copier. 11