Sharp AR-207 AR-207 Operation Manual - Page 23
Use the ORIGINAL TO COPY key to select
View all Sharp AR-207 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
COPYING FROM THE ORIGINAL TABLE MAKING COPIES Copying from the original table Two-sided copies from one-sided originals 1 Place the first original face down on the original table and close the document feeder cover. 2 Use the ORIGINAL TO COPY key to select . 3 Ensure that the desired paper tray is selected. q Paper sizes that can be used in the duplex mode are 8-1/2" x 11", 8-1/2" x 11"R, 8-1/2" x 14", and 11" x 17". q 5-1/2" x 8-1/2" size paper cannot be used in the duplex mode. q The bypass tray cannot be used in the duplex mode. 4 Set the number of copies and press the START key. q The indicator will blink. q The copy will not be output until both sides have been scanned. 21
21
MAKING COPIES
Copying from the original table
COPYING FROM THE ORIGINAL TABLE
Two-sided copies from one-sided originals
1
Place the first original face down on the original table
and close the document feeder cover.
2
Use the ORIGINAL TO COPY key to select
.
3
Ensure that the desired paper tray is selected.
●
Paper sizes that can be used in the duplex mode are 8-1/2" x 11", 8-1/2"
x 11"R, 8-1/2" x 14", and 11" x 17".
●
5-1/2" x 8-1/2" size paper cannot be used in the duplex mode.
●
The bypass tray cannot be used in the duplex mode.
4
Set the number of copies and press the START key.
●
The
indicator will blink.
●
The copy will not be output until both sides have been scanned.