Sharp AR-M208 AR-M208 Operation Manual - Page 61
Border
View all Sharp AR-M208 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
SPECIAL FUNCTIONS 2 IN 1 OR 4 IN 1 7 Use the and keys to select a type of border line. G Select the solid line, broken line or no border line. 2in1 PATTERN 1 BORDER 8 Press the OK key. 3 G The display will return to the basic screen. 9 Make all other desired copier selections and press the START ( ) key. G The copy ratio will be calculated automatically. G If a RSPF is used, copying will start after originals are scanned. G If the platen glass is used, proceed to the next step. 10Replace the finished original with the next original and press the START ( ) key after it lights up. Repeat this step until all originals have been scanned. G Copies will be output each time two originals for 2 in 1 copy or four originals for 4 in 1 copy have been scanned. G To start copying before scanning all originals for a copy (after only one original for 2 in 1 or three originals or less for 4 in 1 have been scanned), press the READ-END key. G Portions of original images may not be copied depending on the original and copy paper sizes and the number of images to be copied onto a page. G Depending on the number of originals and the orientation of the originals and copy paper, the image of originals may be rotated. G To cancel the 2 in 1 / 4 in 1 feature, select the 2 in 1 / 4 in 1 feature again and select "OFF". 59