Sharp CD-ES770 CD-ES770 Operation Manual - Page 11

CD-ES770 Preparation for Use Antenna connection Supplied FM antenna: Connect the FM antenna wire to the FM 75 OHMS terminal and position the FM antenna wire in the direction where the strongest signal can be received. Supplied AM loop antenna: Connect the AM loop antenna to the AM LOOP jack. Position the AM loop antenna for optimum reception. Place the AM loop antenna on a shelf, etc., or attach it to a stand or a wall with screws (not supplied). Note: Placing the antenna on the unit or near the AC power cord may cause noise pickup. Place the antenna away from the unit for better reception. Installing the AM loop antenna: < Assembling > < Attaching to the wall > Speaker connection Connect the black wire to the minus (-) terminal, and the red wire to the plus (+) terminal. Red Black Caution: Use speakers with an impedance of 6 ohms or more, as lower impedance speakers can damage the unit. Do not mistake the right and the left chan- nels. The right speaker is the one on the right side when you face the unit. Do not let the bare speaker wires touch each other. Do not allow any objects to fall into or to be placed in the bass reflex ducts. Do not stand or sit on the speakers. You may Incorrect be injured. Placing the speaker system The left and right speakers have individual shapes. For best performance, place the speakers according to the diagram below. Left speaker Right speaker Wall Screws (not supplied) Note: The speaker grilles are not removable. 11