Sharp CD-ES770 CD-ES770 Operation Manual - Page 32
Troubleshooting chart
UPC - 074000368064
View all Sharp CD-ES770 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Advanced Features CD-ES770 Troubleshooting chart Headphones Before plugging in or unplugging the headphones, reduce the volume. Be sure your headphones have a 1/8" (3.5 mm) diameter plug and impedance between 16 and 50 ohms. The recommended impedance is 32 ohms. Plugging in the headphones disconnects the speakers automatically. Adjust the volume using the VOLUME control. Many potential problems can be resolved by the owner without calling a service technician. If something is wrong with this product, check the following before calling your authorized SHARP dealer or service center. General Symptom The clock is not set to the correct time. When a button is pressed, the unit does not respond. No sound is heard. Possible cause Did a power failure occur? Reset the clock. (Refer to page 15.) Set the unit to the power standby mode and then turn it back on. If the unit still malfunctions, reset it. (Refer to page 33.) Is the volume level set to "0"? Are the headphones connected? Are the speaker wires disconnected? CD player Symptom Playback does not start. Playback stops in the middle or is not performed properly. Playback sounds are skipped, or stopped in the middle of a track. Possible cause Is the disc loaded upside down? Does the disc satisfy the standards? Is the disc distorted or scratched? Is the unit located near excessive vibrations? Is the disc very dirty? Has condensation formed inside the unit? 32