Sharp CS-2800 CS-2850/2800 Operation Manual - Page 13

PAPER ROLL REPLACEMENT 1. Lift the paper holder up. (See Fig. :1) 2. Fold the leading edge of the paper roll 3 to 5 cm. (Do not fold it slantwise.) (See Fig. 2) 3. Insert the paper roll from the left side of the paper holder and make sure the paper roll is set in the proper direction (with the paper feeding from the bottom) as shown in the figure. (See Fig. 3) 4. Fold the paper holder down to the printer cover. Insert the leading edge of the paper into the opening directly behind the print mechanism. (See Fig. 4) 5. Lift the paper holder up. Press the paper feed key and feed the paper under the edge of the paper cutter. (See Fig. 5) Paper holder 3 to 5 cm (1-3/16" to 1-31/32") Correct 0 Wrong Fig. 1 Fig. 2 Correct Fig. 3 x Wrong Paper cutter Paper teed key Fig. 4 Fig. 5 11