Sharp KB-0333KK KB-0333K Operation Manual / Installation Instructions - Page 9

Install Hood, Non-ducted Filters

Get Sharp KB-0333KK PDF manuals and user guides View all Sharp KB-0333KK manuals
Add to My Manuals
Save this manual to your list of manuals

Page 9 highlights

1 Hang hood from (4) mounting screws. Slide hood towards wall until mounting screws are engaged in narrow end of (4) keyholes. Tighten mounting screws securely. A long screwdriver works best. INSTALL HOOD 4 Install (2) PAR20, 50 W Maximum Halogen Bulbs or (2) R16, 40 W Maximum Incandescent Bulbs. Purchase bulbs separately. 2 Replace bottom cover. 3 Connect ductwork to hood. Use duct tape to make joints secure and air tight. 5 Replace filters, turn on power at service panel and test for proper operation. If hood is to be installed Non-Ducted: • Purchase a set of (2) charcoal filters, model KBK-330, from your local distributor, retailer or from Sharp (see page 2). NON-DUCTED FILTERS • Attach charcoal filters to the aluminum mesh filters. Be sure that the sides with the blue and yellow stripes are facing down (toward the range top). 9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
1
Hang hood from (4)
mounting screws
. Slide hood towards
wall until mounting screws are engaged in narrow end of
(4)
keyholes
. Tighten mounting screws securely. A long
screwdriver works best.
2
Replace bottom cover.
3
Connect ductwork to hood. Use
duct tape
to make joints
secure and air tight.
4
Install (2) PAR20, 50 W Maximum
Halogen Bulbs
or
(2) R16, 40 W Maximum
Incandescent Bulbs
. Purchase
bulbs separately.
5
Replace filters, turn on power at service panel and test for
proper operation.
If hood is to be installed Non-Ducted:
• Purchase a set of (2) charcoal filters, model KBK-330,
from your local distributor, retailer or from Sharp (see
page 2).
• Attach charcoal filters to the aluminum mesh filters. Be
sure that the sides with the blue and yellow stripes are
facing down (toward the range top).
9
INSTALL HOOD
NON-DUCTED FILTERS