Sharp KB-4425J Installation Manual - Page 8

INSTALLATION MANUAL MODEL AND SERIAL NUMBER LOCATION The name plate, including model and serial number, is located on the faceplate behind the Microwave Drawer front. CARE, CLEANING AND MAINTENANCE Refer to the Operation Manual for cleaning instructions. If removing the range is necessary for cleaning or maintenance, disconnect the electrical power supply. If the electrical supply is inaccessible, lift the unit slightly at the front and pull out away from the wall. Pull only as far as necessary to disconnect the electrical supply. Finish removing the unit for servicing and cleaning. Reinstall in reverse order making sure to level the range and check electrical connections. See pages 2 and 3 for proper anchoring instructions. BEFORE YOU CALL FOR SERVICE Read the BEFORE YOU CALL and operating instruction sections in your Operation Manual. It may save you time and expense. The list includes common occurrences that are not the result of defective workmanship or materials in this range. Refer to the warranty in your Operation Manual for our toll-free service number and address. Please call or write if you have inquiries about your range product and/or need to order parts. NOTE Please do not open or close the lower oven door for 30 seconds after plugged in. TINSEB407MRR0 SHARP ELECTRONICS CORPORATION Sharp Plaza, Mahwah, New Jersey 07430-2135 8 PRINTED IN USA