Sharp LC 32SH20U Operation Manual - Page 17

Watching TV You can change channels in several ways. POWER CDCD DISPLAY INPUT MUTE CD FREEZE SURROUND FLASHBACK CZ) CD SLEEP MENU 5 AUDIO CC VIEWMODE AVMODE CD CD C:::)C:::) CK)GD CE)CZ} FAVORITE CH SHARP Method 1 Using CH A/V TV. on the remote control unit or on the • If your cabte-TV system includes analog and digital channels using the same channel number, your channelup function wilt scroll through the analog channel first, then the digital channel. Although it may appear as though the channel does not change, it actually moves from the analog to the digital channel in sequence. If you use channel-down, it will move in reverse, from the digital channel to the analog channel. Method 2 1 Press FLASHBACK to switch to the previously tuned channel. 2 Press FLASHBACK again to switch back to the currently tuned channel. C • FLASHBACK wilt not work if no channel has been changed after the TV is turned on. Method 3 Using remote control buttons 0=9, • (DOT) to select channels for VHF/UHF/CATV/DIGITAL To select a 1 or 2-digit channel number (e. g., Channel 5): Press 5-->ENT • When selecting a 1-digit channel number, it is not necessary to press 0 before the number. • When you enter 0=9 only, channel selection wilt be made if there is no operation within a few seconds. To select a 3=digit channel number (e. g., Channel 115): Press 1-->1-->5->ENT To select a 4=digit channel number (e. g., Channel 22.1): Press 2-->2-->• (DOT) -->1-->ENT • When you enter 0=9 only, channel selection wilt be made if there is no operation within a few seconds, • If you push "0" by itself, nothing will happen, • Complete the above steps within a few seconds, • When you enter 0=9 and o (DOT), channel selection wilt be made if there is no operation within a few seconds, (_=16