Sharp LC-52LE640U LC-52LE640U LC-52C6400U LC-60LE640U LC-60C6400U LC-7 - Page 10
QUICK INSTALLATION TIPS, Experiencing HD Images, Using the Remote Control Unit, QUICK REFERENCE - lc -
View all Sharp LC-52LE640U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
QUICK REFERENCE QUICK INSTALLATION TIPS 1 Attach your antenna to the back of the television. (See page 9.) 2 Connect the AC plug for the television into the AC outlet. LC-80LE633U AC outlet • Bundle the cords properly with the cable tie. Experiencing HD Images An HDTV without an HD source is just an ordinary TV. To enjoy HD images on the TV, you should get HD programming from the following: • Over-the-air broadcasting via HD quality antenna • HD cable/satellite subscription • HD compatible external equipment • For information on updating to HD programming, ask your cable/satellite service provider. Using the Remote Control Unit Use the remote control unit by pointing it towards the remote control sensor on the TV. Objects between the remote control unit and the remote control sensor may prevent proper operation. LC-70LE640U LC-60/52LE640U LC-70C6400U LC-60/52C6400U 2 1 1 1 2 1 AC outlet • Place the TV close to the AC outlet, and keep the power plug within reach. • TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT TOUCH UN-INSULATED PARTS OF ANY CABLES WITH THE AC CORD CONNECTED. 3 When turning on the TV for the first time, press POWER on the television. • For model LC-80LE633U, the control panel is located on the left side of the TV as seen from the front. POWER 17´ (5 m) 30º 30º Remote control sensor 30º 30º ■ Cautions regarding the remote control unit • Do not expose the remote control unit to shock. In addition, do not expose the remote control unit to liquids, and do not place in an area with high humidity. • Do not install or place the remote control unit under direct sunlight. The heat may cause deformation of the remote control unit. • The remote control unit may not work properly if the remote control sensor on the TV is under direct sunlight or strong lighting. In such cases, change the angle of the lighting or the TV, or operate the remote control unit closer to the remote control sensor. 4 Insert the batteries into the remote control unit. (See page 9.) • Speakers cannot be detached from the TV. • The TV angle cannot be adjusted. 8 IMPORTANT: IF THE UNIT DOES NOT POWER ON - UNPLUG THE TELEVISION FROM THE OUTLET AND REPEAT THE INSTALLATION STEPS. IF YOU STILL ENCOUNTER NO POWER, PLEASE CONTACT US AT 1-800-BE-SHARP.