Sharp LC-70LE550U Operation Manual - Page 18

On-Screen Display Menu On-Screen Display Menu Operation Example Example Picture STANDARD (ENERGY STAR) OPC On:Display Backlight 7 Contrast 30 Brightness 0 Color 4 Tint 0 Sharpness 2 Advanced Reset RETURN EXIT ENTER The bar above is an operational guide for the remote control. The icon of the button operated by the remote control will turn white. 1 Press MENU to display the MENU screen. 2 1 Press c/d to select the desired menu. 2 Press a/b to select a specific adjustment item. 3 Press c/d (or a/b) to select or adjust the desired setting, and then press ENTER. 3 Press MENU to exit. Option Audio Only Icon Light Up Setting Output Select Fixed Color System Auto Caption Setup Favorite CH Fine Sync. 4 Identification Software Update 1 Item displayed in light blue • This indicates the item currently selected. 2 This indicates the current setting for the item. 3 Item displayed in white • This indicates that the item can be selected. 4 Item displayed in gray • This indicates that the item cannot be selected. There are various reasons why the items cannot be selected, but the main reasons are as follows: -Nothing is connected to the selected input terminal. -The function is not compatible with the current input signal. • Menu options differ in the selected input modes, but the operating procedures are the same. • The screens in the operation manual are for explanation purposes (some are enlarged, others cropped) and may vary slightly from the actual screens. • The order of explanations for each menu item in the following pages is not necessarily in accordance with the alignment of the items on the screen. Menu Operation Buttons Using the remote control Use the following buttons on the remote control to operate the menu. MENU: Press to open or close the menu screen. a/b/c/d: Press to select a desired item on the screen or adjust a selected item. ENTER: Press to confirm the settings of Reset. RETURN: Press to return to the previous step. Using the control panel of the main unit You can also operate the menu with the control panel of the main unit. Button operations on the control panel correspond to the ones on the remote control as shown below. MENU: MENU on the remote control. INPUT: ENTER on the remote control. CHU/V: Cursor a/b on the remote control. VOLk/l: Cursor c/d on the remote control. 18 6@&JOEC