Sharp LC-70LE550U Operation Manual - Page 7

QUICK REFERENCE Attaching the Stand • Before attaching the stand, make sure to turn off the TV and unplug the AC cord. • Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged. CAUTION • Attach the stand in the correct direction. • Do not remove the stand from the TV unless using an optional wall mount bracket to mount it. • Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over. • After attaching the stand to the TV, do not hold the stand when you put up, set up, move or lay down the TV. 1 Confirm that there are 12 screws (8 long screws and 4 short screws) supplied with the stand unit. 2 1 Set the post for the stand unit onto the polystyrene foam. 2 Attach the base to the post. 3 Insert and tighten the 8 screws into the 8 holes on the bottom of the base. • Hold the stand unit securely with one hand, and then tighten the screws. ■ LC-70LE550U 3 Long screws 3 1 Insert the stand into the openings on the bottom of the TV. • Make sure that the stand is firmly inserted into the TV. Improper installation may result in tilting of the TV set. 2 Insert and tighten the 4 screws into the 4 holes on the rear of the TV. Soft cushion Short screws 2 2 1 1 Removing the Stand • Before detaching the stand, make sure to turn off the TV and unplug the AC cord. CAUTION • Do not remove the stand from the TV unless using an optional wall mount bracket to mount it. 1 Unfasten the four screws used to secure the stand in place. 2 1 ■ LC-60LE550U 1 FRONT 2 Detach the stand from the TV. 3 Long screws 2 1 1 FRONT • In the installation procedure, be careful not to catch your fingers between the TV set and the floor. 7 6@&@JOEE