Sharp LC37DB5U LC-37DB5U Operation Manual - Page 30
Useful adjustment settings
UPC - 074000363045
View all Sharp LC37DB5U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Useful adjustment settings Image position For adjusting a picture's horizontal and vertical position. 1 Press MENU and the MENU screen displays. Moving the picture on the screen You can move the picture around on the screen. Press a/b/c/d to move an image on the screen to the desired position. Press ENTER to return to the original image position. 2 Press c/d to select "Setup". NOTE • While pressing a/b/c/d, an on-screen image, "Adjusting Position" displays to the desired position. • This setting cannot be stored. Once the TV shuts down or 3 Press a/b to select "Position", and then press ENTER. enters standby mode, the setting is erased. To move the picture around the screen again, you must perform the above procedure again. • The image position setting using the steps on this page 4 Press a/b to select "H-Pos." or "V-Pos.". can be stored. Select either according to your objectives. • "TV", "INPUT1", "INPUT2", "INPUT3" and "INPUT4" can each adjust the image position setting on this page. The same for view modes. H-Pos. [ 0] -10 +10 • Even when the image fills the screen, its position can be V-Pos. [ 0] -20 +20 adjusted with this function. Reset • Press ENTER to reset the image to original positions. Selected item Description H-Pos. V-Pos. Centers the image by moving it to the left or right. Centers the image by moving it up or down. 5 Press c/d to adjust the item to your desired position. NOTE • For resetting all adjustment items to the factory preset values, press a/b to select "Reset", and then press ENTER. • Adjustments are stored separately according to input source. • You can easily move the image position as shown on this page, but when the power is switched off the image will return to the previously memorized position. 30