Sharp MX-M700N MX-M550 MX-M620 MX-M700 Operation Manual - Page 131
Transparency film with insert sheets
View all Sharp MX-M700N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 131 highlights
SPECIAL MODES Transparency film with insert sheets When copying onto transparency film, blank insert sheets can be placed between transparent sheets. Example: Inserting insert sheets between transparencies Originals (1-sided) Originals (2-sided) Two-sided originals are only supported when automatic document feeding is used. Insert sheets Inserts can also be copied on. If the transparencies are loaded in tray 3, steps 1 to 5 below are not necessary. 1 Load transparency film into the bypass tray. Remove any paper already in the bypass tray before loading the transparency film. (To load paper in the bypass tray, see pages 2-10 and 2-11.) ● This function only operates in "one-sided to onesided" and "two-sided to one-sided" modes. ● Multiple copies cannot be selected in this mode. ● The inserts are inserted under each transparency as shown at left. ● Select insert paper that is the same size as the transparencies. ● When feeding insert paper from an inserter, copying on the insert paper is not possible. ● Transparencies can be fed from the bypass tray or tray 3. ● If the transparencies are loaded in tray 3, be sure to set the paper size and paper type as explained on pages 2-14 and 2-15. 4 Touch the [OK] key. TYPE/SIZE SETTING AUTO-INCH AUTO-AB SIZE 81/2X11 A4,B5 TYPE OK SIZE INPUT NON STANDARD SIZE 2/2 If the paper size was changed from an inch size to an AB size, or from an AB size to an inch size, be sure to set the paper type and size as explained on steps 5 to 7 on page 2-14 and steps 8 to 10 on page 2-15. 5 2 Touch the [PAPER SELECT] key in the main screen and select the bypass tray paper type in the paper setting screen (touch (X) below). FOR COPY. 2. 81/2x11 PLAIN HEAVY PAPER PLAIN 81/2x11 PLAIN 5. 81/2x11 PLAIN 0 AUTO ORIGINAL AUTO EXPOSURE PAPER SELECT 100% COPY RATIO (X) 3 Touch the [TRANSPARENCY] key. TYPE. LETTER HEAD PRE-PUNCHED COLOR HEAVY PAPER LABELS TRANSPARENCY 5 Select the bypass tray. 0 81/2x11 AUTO ORIGINAL AUTO N PLAIN EXPOSURE Y 5. 81/2x11 PAPER SELECT N PLAIN 100% COPY RATIO To display the special modes screen... See "General procedure for using special functions" on page 5-2. 6 Touch the [TRANSPARENCY INSERTS] key in the special modes screen (2nd screen). SPECIAL MODES The Transparency inserts setting screen will appear. COVERS/INSERTS TRANSPARENCY INSERTS The transparency inserts icon ( , etc.) will also BOOK COPY TAB COPY appear in the upper left corner of the screen to indicate that the function is turned on. 5-23