Sharp MX-M700N MX-M550 MX-M620 MX-M700 Operation Manual - Page 73
Removing a staple jam in the finisher
View all Sharp MX-M700N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
FINISHER AND SADDLE STITCH FINISHER ■ Removing a staple jam in the finisher 1 Perform steps 1 to 2 of the procedure for "Replacing the cartridge in the finisher" on page 3-7. 2 Holding the knob, lower part (A). 4 Holding the knob, return part (A) to its original position. Stapling area (A) (A) NOTE Do not touch the stapling area. The stapler could injure you. 3 Remove any jammed staples. 5 Return the staple case to its original position. Insert the cartridge all 3 the way in until it clicks into place. 6 Close the front cover of the finisher. 3-9
FINISHER AND SADDLE STITCH FINISHER
3-9
3
■
Removing a staple jam in the finisher
1
Perform steps 1 to 2 of the procedure for
"Replacing the cartridge in the finisher"
on page 3-7.
2
Holding the knob, lower part (A).
3
Remove any jammed staples.
4
Holding the knob, return part (A) to its
original position.
5
Return the staple case to its original
position.
Insert the cartridge all
the way in until it clicks
into place.
6
Close the front cover of the finisher.
NOTE
Do not touch the stapling area.
The stapler could injure you.
(A)
Stapling area
(A)