Sharp PG-D120U PG-D120U Operation Manual - Page 29
Using the Blue Screen Function, Using the On-Screen Display Override, Function
UPC - 074000347502
View all Sharp PG-D120U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
On-screen Display IMAGE ADJ. BLUE SCREEN BLACK SCREEN INPUT DISPLAY SYSTEM REVERSE INVERT [ON] [OFF] [OFF] [OFF] [OFF] :SEL. :ADJ. MENU : E N D On-screen Display REMAIN 5M REMAIN 4M REMAIN 1M On-screen Display IMAGE ADJ. BLACK SCREEN INPUT DISPLAY E-ZOOM REVERSE INVERT [OFF] [OFF] [OFF] [OFF] [OFF] :SEL. :ADJ. MENU : E N D Using the Blue Screen Function This projector is equipped with a Blue Screen function that will turn the screen blue when the video input terminal is not connected to anything, or the video component is turned off. • Press the MENU button. While the MENU screen is displayed, press the ADJUSTMENT / buttons to select IMAGE ADJ. Then press the ENTER button to display the IMAGE ADJ. screen as shown. Press the ADJUSTMENT / buttons to select "BLUE SCREEN," and press the ADJUSTMENT / buttons to select ON or OFF. Press the MENU button to return to the normal screen. • When the Blue Screen function is on, the screen will turn blue when no video signal is being input through the video input terminal. • When the Blue Screen function is on, and no video signal is input via the input terminal for more than 15 minutes, the power is automatically turned off. • The indicators appear as shown each minute before the power is turned off, from five minutes before until one minute before. Notes: • The Blue Screen Function does not operate in RGB mode. • When the power is turned off, the POWER indicator will light red. • To turn the power on again, press the POWER button to set it to OFF, then press it again to set it to ON. Using the On-Screen Display Override Function The On-Screen Displays ("RGB 1024 × 768, 60Hz," etc.) that appear during input select can be turned off. • Press the MENU button. While the MENU screen is displayed, press the ADJUSTMENT / buttons to select IMAGE ADJ. Then press the ENTER button to display the IMAGE ADJ. screen as shown. Press the ADJUSTMENT / buttons to select "INPUT DISPLAY," and press ADJUSTMENT / buttons to select ON or OFF. • When OFF is selected, the On-Screen Display ("RGB 1024 × 768, 60Hz," etc.) will not be displayed during input select. E-29