Sharp PG-F317X PG-F317X Operation Manual - Page 54
Setting up the Projector Network Environment Network menu, Continued
UPC - 074000365520
View all Sharp PG-F317X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Setting up the Projector Network Environment ("Network" menu) (Continued) Menu operation n Page 39 2 DHCP Client Setting Connect the LAN cable before turning the projector on. If not, the DHCP Client function does not work. Selectable items On Off Description Obtains configuration parameters for TCP/IP network automatically. Sets the TCP/IP manually. Select "On" for "DHCP Client". "Obtaining IP Address..." appears, then the menu screen appears. Confirm the parameters of IP Address, Subnet Mask and Gateway on the TCP/IP screen. If the DHCP server is not available, "Could not obtain IP Address." appears. In this case, set the TCP/IP manually. (See the item 3.) 3 TCP/IP Setting Set the TCP/IP manually. Selectable items IP Address Subnet Mask Gateway Description Factory default setting: 192.168.150.002 Enter an IP address appropriate for the network. Factory default setting: 255.255.255.000 Set the subnet mask to the same as that of the computer and equipment on the network. Factory default setting: 000. 000. 000. 000 * When not in use, set to "000. 000. 000. 000". Note • Confirm the existing network's segment (IP address group) to avoid setting an IP address that duplicates the IP addresses of other network equipment or computers. If "192.168.150.002" is not used in a network with an IP address of "192.168.150.XXX", you don't have to change the projector IP address. • For details about each setting, consult your network administrator. 1 Select "Off" for "DHCP Client", then press ENTER. 2 Select "TCP/IP", then press ENTER. 3 Enter "IP Address" using P, R, Q and O, then press ENTER. Setting the TCP/IP Network IP Address Subnet Mask Gateway 192 .168 .150 .002 255 .255 .255 .000 000 .000 .000 .000 4 Confirming the Projector Information You can confirm the MAC address and projector name. Displayed items MAC Address Projector Description The MAC address of the projector is displayed. The projector name is displayed. 4 Enter "Subnet Mask" using P, R, Q and O, then press ENTER. 5 Enter "Gateway" using P, R, Q and O, then press ENTER. Note • For information on how to change the projector name, see "SETUP MANUAL" contained in the supplied CD-ROM. 50