Sharp VC-A410U Operation Manual - Page 7
After, Connection
View all Sharp VC-A410U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Cable TV Connections D Connection with two cable boxes, A/B switch and splitter The following connection is necessary to record a cable TV program (even those scrambled by a cable company) while watching another cable TV program. The following connection requires two cable boxes, a 2way splitter and an A/B switch. •Connect as shown. Then go to "After the Connection". From Splitter CATV (Not supplied) system Coaxial cable (Not supplied) Cable Box 1 IN OUT 05 05 VCR Rear (Hi-Fi model) IN OUT AV 1 AUDIO OQ CHANNEL 3- -4 /UHF CATV OUT Cable Box 2 IN OUT A/B switch (Not supplied) A TV Rear ANT/CABLE Coaxial cable (Not supplied) Coaxial cable (Supplied) Using the A/B Switch 1. Set the A/B switch to the "A" position in the following situations. • To watch a cable TV program while recording another program. 60 To watch a cable TV program when the VCR is turned off. 2. Set the A/B switch to the "B" position in the following situations. • To play back a cassette on the VCR. • To watch a program being recorded, or to change (or watch) channels with the cable box 2. The output channel of the cable box 2 and the VCR must be the same. NOTE > • If you turn off the cable box, you cannot record or view a CATV program. • If you have questions regarding any connection procedure, please contact your cable company or the nearest Sharp Authorized Service. After the Connection Plug in the power cords of the TV and cable box. Then go to EZ Set Up.