Sharp XR-32X XR-32S XR-32X Operation Manual
Sharp XR-32X - Notevision XGA DLP Projector Manual
 |
UPC - 074000365575
View all Sharp XR-32X manuals
Add to My Manuals
Save this manual to your list of manuals |
Sharp XR-32X manual content summary:
- Sharp XR-32X | XR-32S | XR-32X Operation Manual - Page 1
DATA PROJECTOR MODEL XR-32X XR-32S OPERATION MANUAL XR-32X Introduction Quick Start Setup Connections Basic Operation Useful Features Appendix - Sharp XR-32X | XR-32S | XR-32X Operation Manual - Page 2
IMPORTANT • For your assistance in reporting the loss or theft of your Projector, please record the Model and Serial Number located on the bottom of the projector and retain this information. • Before recycling the packaging, please ensure that you have checked the contents of the carton thoroughly - Sharp XR-32X | XR-32S | XR-32X Operation Manual - Page 3
-rewireable (moulded) plug incorporating a 10A fuse. Should the fuse need to be replaced, a BSI or ASTA approved BS 1362 fuse marked or and of the same . To fit an appropriate plug to the mains lead, follow the instructions below: WARNING: THIS APPARATUS MUST BE EARTHED. IMPORTANT: The wires - Sharp XR-32X | XR-32S | XR-32X Operation Manual - Page 4
English, German, French, Spanish, Italian, Dutch, Swedish, Portuguese, Chinese and Korean. Carefully read through the operation instructions before operating the projector. Die mitgelieferte CD-ROM enthält Bedienungsanleitungen in Englisch, Deutsch, Französisch, Spanisch, Italienisch, Niederländisch - Sharp XR-32X | XR-32S | XR-32X Operation Manual - Page 5
operation manual carefully. Introduction ENGLISH There are two important reasons for prompt warranty registration of your new SHARP Projector, using the REGISTRATION CARD packed with the projector. 1. WARRANTY This is to assure that you immediately receive the full benefit of the parts, service - Sharp XR-32X | XR-32S | XR-32X Operation Manual - Page 6
SHARP PROJECTOR, MODEL XR-32X/XR-32S This device complies with Part 15 Sharp at 1-800-BE-SHARP. U.S.A. ONLY Caution Concerning Lamp Replacement See "Replacing the Lamp" on page 52. This SHARP projector uses a DLP® chip. This very sophisticated panel contains 786,432 (XR32X)/480,000 (XR-32S - Sharp XR-32X | XR-32S | XR-32X Operation Manual - Page 7
manual are based on the XR-32X Picture Mode Contrast Bright Red Blue CLR Temp Bright Boost C.M.S. Setting C.M.S. DNR Lamp Setting Reset Standard 0 0 0 0 0 1 On Off Bright SEL./ADJ. ENTER END Button used in this step On-screen display 38 Info ........Indicates safeguards for using the projector - Sharp XR-32X | XR-32S | XR-32X Operation Manual - Page 8
Accessories 10 Part Names and Functions 11 Projector 11 Rear View 12 Inserting the Batteries 14 Usable Range 15 Quick Start Quick Start 16 Setup and Projection 16 Setup Setting up the Projector 18 Setting up the Projector 18 Standard Setup (Front Projection) ....... 18 Ceiling-mount Setup - Sharp XR-32X | XR-32S | XR-32X Operation Manual - Page 9
the Lamp 52 Lamp 52 Caution Concerning the Lamp 52 Replacing the Lamp 52 Removing and Installing the Lamp Unit 53 Resetting the Lamp Timer 54 Connecting Pin Assignments 55 RS-232C Specifications and Commands 57 Computer Compatibility Chart 62 Troubleshooting 63 For SHARP Assistance - Sharp XR-32X | XR-32S | XR-32X Operation Manual - Page 10
product. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the product. Any mounting of the product should follow the manufacturer's instructions, and should use a mounting accessory recommended by the manufacturer. 9. Transportation A product and - Sharp XR-32X | XR-32S | XR-32X Operation Manual - Page 11
20. Safety Check Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition. 21. Wall or Ceiling Mounting This product should be mounted to a wall or ceiling only as recommended by the - Sharp XR-32X | XR-32S | XR-32X Operation Manual - Page 12
of glass par- ticles if lamp ruptures. In case of lamp rupture, contact your nearest Sharp Authorized Projector Dealer or Service Center for replacement. See "Replacing the Lamp" on page 52. Caution concerning the setup of the projector ■ For minimal servicing and to maintain high image quality - Sharp XR-32X | XR-32S | XR-32X Operation Manual - Page 13
are in. Temperature monitor function ■ If the projector starts to overheat due to setup problems or blockage of the air vents, " " and " " will illuminate in the lower left corner of the picture. If the temperature continues to rise, the lamp will turn off, the temperature warn- ing indicator - Sharp XR-32X | XR-32S | XR-32X Operation Manual - Page 14
Remote control for XR-32X for XR-32S < manual (this manual and CD-ROM ) Note • Codes in "< >" are Replacement parts codes. Optional accessories ■ Lamp unit ■ Ceiling-mount adaptor ■ Ceiling-mount Sharp Authorized Projector Dealer or Service Center. 10 - Sharp XR-32X | XR-32S | XR-32X Operation Manual - Page 15
28 button For entering the Keystone Correction mode. Front View Zoom ring 26 For enlarging/ reducing the picture. Remote control 15 sensor Exhaust vent 49 25, 50 Lamp indicator 50 Temperature warning indicator 32 ECO+QUIET button For lowering the noise of the cooling fan and extending the - Sharp XR-32X | XR-32S | XR-32X Operation Manual - Page 16
Part Names and Functions (Continued) Numbers in Z refer to the main pages in this operation manual where the topic is explained. Rear XR-32X only 22 S-VIDEO input terminal Terminal for connecting video equipment with an S-video terminal. 24 RS-232C terminal Terminal for controlling the projector - Sharp XR-32X | XR-32S | XR-32X Operation Manual - Page 17
menu screen during menu operations. 38 MENU/HELP button 48 For displaying adjustment and setting screens, and help screen. 30 RESIZE button For switching the picture size (NORMAL, BORDER, etc.). 33 PICTURE MODE button For selecting the appropriate picture. * XR-32X only 13 Introduction - Sharp XR-32X | XR-32S | XR-32X Operation Manual - Page 18
Part Names and Functions (Continued) Inserting the Batteries 1 Pull down the tab on remove them using a cloth. • The batteries included with this projector may run down in a short period, depending on how they are kept. Be sure to replace them as soon as possible with new batteries. • Remove the - Sharp XR-32X | XR-32S | XR-32X Operation Manual - Page 19
the remote control • Ensure that you do not drop it or expose it to moisture or high temperature. • The remote control may malfunction under a fluorescent lamp. In this case, move the projector away from the fluorescent lamp. 30° 23n (7 m) Remote control signal transmitters Remote control 15 - Sharp XR-32X | XR-32S | XR-32X Operation Manual - Page 20
with the computer). For details, see the page described below for each step. Setup and Projection In this section, connection of the projector and the computer is explained using one example. 3 8 STANDBY/ON button 6 INPUT buttons 8 STANDBY button 3 ON button 4 ENTER button 6 COMPUTER button - Sharp XR-32X | XR-32S | XR-32X Operation Manual - Page 21
Guide 1 After the projector turns on, the Setup Guide appears. (When "Setup Guide" is set to "On". See page 44.) 2 Follow the steps in the Setup Guide and adjust the focus, picture 1024 × 768 D DVI-D Video *XR-32X only • When you press INPUT on the projector, the INPUT list appears. Press '/" to - Sharp XR-32X | XR-32S | XR-32X Operation Manual - Page 22
"Screen Size and Projection Distance". Ceiling-mount Setup ■ It is recommended that you use the optional Sharp ceiling-mount adaptor and unit for this installation. Before mounting the projector, contact your nearest Sharp Authorized Projector Dealer or Service Center to obtain the recommended - Sharp XR-32X | XR-32S | XR-32X Operation Manual - Page 23
rear projection (with a translucent screen) [Menu item ➞ "Rear"] ■ Ceiling mounted, rear projection (with a translucent screen) [Menu item ➞ "Ceiling + Rear"] Indication of the Projection Image Size and Projection Distance Example: NORMAL Mode (4:3) Picture Size 300" 200" 100" 80" 60" 240"×180 - Sharp XR-32X | XR-32S | XR-32X Operation Manual - Page 24
Setting up the Projector (Continued) Screen Size and Projection Distance NORMAL Mode (4:3) Picture (Screen) size Projection distance [L] Diag. 3/64Љ) 10 cm (3 25/32Љ) 8 cm (3 1/32Љ) 6 cm (2 33/64Љ) 5 cm (2 1/64Љ) 4 cm (1 49/64Љ) 4 cm (1 33/64Љ) 3 cm (1 1/64Љ) χ: Picture size (diag.) (in/cm) - Sharp XR-32X | XR-32S | XR-32X Operation Manual - Page 25
manual of the connecting equipment. • You may need other cables or connectors not listed below. Terminals on the Projector Example: Terminals of XR-32X simultaneously when using a SHARP notebook computer). Refer to the specific instructions in your computer's operation manual to enable your computer - Sharp XR-32X | XR-32S | XR-32X Operation Manual - Page 26
camera or a video game VIDEO is only for XR-32X. Note • Only for XR-32X: - While the projector is connected to video equipment that has an HDMI digital cable.) - For details on compatibility for connection, see support information on DVI connection provided by the video equipment manufacturer. - Sharp XR-32X | XR-32S | XR-32X Operation Manual - Page 27
audio cable audio output (commercially available or available terminal as Sharp service part QCNWGA038WJPZ) Terminal on the projector AUDIO 1 RCA audio output terminal RCA audio cable (commercially available) AUDIO 2 (XR-32X) AUDIO (XR-32S) Monitor Audio output terminal Cables for a camera or - Sharp XR-32X | XR-32S | XR-32X Operation Manual - Page 28
if your computer terminal is not correctly set up. Refer to the operation manual of the computer for details. • See page 56 for connection of an the RS-232C terminal on the computer. This may damage your computer or projector. • Do not connect or disconnect an RS-232C serial control cable to - Sharp XR-32X | XR-32S | XR-32X Operation Manual - Page 29
indicator illuminates to indicate the status of the lamp. Green: The lamp is on. Blinking in green: The lamp is warming up. Red: The lamp is shut down abnormally or the lamp should be replaced. • When switching on the projector, a slight flickering of the image may be experienced within the first - Sharp XR-32X | XR-32S | XR-32X Operation Manual - Page 30
" "Setup Guide" to "Off". (See page 44.) STANDBY/ON button ENTER button Adjusting the Projected Image 1 Adjusting the Focus You can adjust the focus with the focus ring on the projector. Rotate the focus ring to adjust the focus while watching the projected image. 2 Adjusting the Picture Size You - Sharp XR-32X | XR-32S | XR-32X Operation Manual - Page 31
can be adjusted using the adjustment feet at the front and rear of the projector. When the screen is above the projector, the projection image can be made higher by adjusting the projector. 1 Lift the projector to adjust its height while lifting the HEIGHT ADJUST lever. 2 Remove your hands from - Sharp XR-32X | XR-32S | XR-32X Operation Manual - Page 32
1 Press KEYSTONE to enter the Keystone Correction mode. • You can also display the on-screen display of the Keystone Correction mode with KEYSTONE on the projector. 2 Press P/Q or O/R to adjust the Keystone Correction. • You can also adjust the Keystone Correction using the adjustment buttons on the - Sharp XR-32X | XR-32S | XR-32X Operation Manual - Page 33
remote control to select the input mode. • When you press INPUT on the projector or DVI on the remote control (XR-32X only), the INPUT list appears. Press P/R to switch the INPUT mode. COMPUTER, DVI (XR-32X only), S-VIDEO, VIDEO buttons AV MUTE button VOL +/- (Volume) buttons Adjusting the Volume - Sharp XR-32X | XR-32S | XR-32X Operation Manual - Page 34
1024 x 640 800 x 600 800 x 500 Input signal Computer XR-32X XR-32S Image type Resolution Resolution lower than lower than XGA SVGA NORMAL XGA SVGA Resolution higher than XGA Resolution higher than SVGA 4:3 aspect ratio FULL DOT BY DOT 800 x 600 1024 x 768 1152 x 864 1280 x 800 800 - Sharp XR-32X | XR-32S | XR-32X Operation Manual - Page 35
VIDVEIODEO/DTV Input signal Video/DTV Image type NORMAL For 4:3 screen AREA ZOOM V-STRETCH For 16:9 screen BORDER *1 STRETCH *1 480I, 480P, 576I, 576P, NTSC, PAL, SECAM 4:3 aspect ratio Squeeze *1 *1 *1 *1 Letter box 720P, 1035I, 1080I 16:9 aspect ratio *1 16:9 aspect ratio - Sharp XR-32X | XR-32S | XR-32X Operation Manual - Page 36
MAGNIFY buttons POINTER button SPOT button Adjustment buttons (P/R/O/Q) EFFECT button PICTURE MODE button ECO+QUIET button AUTO SYNC button 1 Press POINTER power consumption will decrease, and the lamp life will extend. Note • Refer to "Lamp Setting" on page 42 for de- tails of the Eco+Quiet mode - Sharp XR-32X | XR-32S | XR-32X Operation Manual - Page 37
Sync function works when detecting input signal after the projector turns on. Press AUTO SYNC to manually adjust with Auto Sync function. Note • When ) change. - When the Resize mode is changed. - When the Picture mode is changed. - When the Progressive mode is changed. Useful Features Note • - Sharp XR-32X | XR-32S | XR-32X Operation Manual - Page 38
projector with the remote control. For details, see the operation manual of the receiver. Connecting with a USB cable Computer To USB terminal Remote receiver To USB terminal (optional, AN-MR2) or USB cable (commercially available or available as Sharp service part that do not support USB. • - Sharp XR-32X | XR-32S | XR-32X Operation Manual - Page 39
shows the items that can be set in the projector. "Picture" menu PAGE 1 Picture Picture Mode Contrast Bright Color Tint Sharp Red Blue SCR - ADJ PRJ - ADJ Standard 0 0 0 0 0 0 0 Help SEL./ADJ. ENTER END Main menu Picture Page 40 Picture Mode Page 40 Sub menu Standard Presentation Movie - Sharp XR-32X | XR-32S | XR-32X Operation Manual - Page 40
Picture Resize Image Shift Keystone SCR - ADJ PRJ - ADJ Border 0 0 OSD Display Closed Caption Background Setup Guide PRJ Mode Language On Off Logo On Front English Help Main menu SCR - ADJ Page 43 SEL./ADJ. ENTER END *3 Adjustment range for XR-32X. *4 Adjustment range for XR-32S. Resize - Sharp XR-32X | XR-32S | XR-32X Operation Manual - Page 41
flickering image appear Data image is not centered Color is faded or poor Picture is dark The image is distorted Reset all • Data image is not centered Auto Sync H-Pos V-Pos • Color is faded or poor COMPUTER/COMPONENT or DVI (XR-32X only) input Signal type: Auto/RGB/Component S-VIDEO or VIDEO input - Sharp XR-32X | XR-32S | XR-32X Operation Manual - Page 42
buttons on the projector. 1 Press MENU/HELP. • The "Picture" menu screen for the Picture" to adjust. Example: "Picture" screen menu for COMPUTER (RGB) input Menu item Picture SCR - ADJ PRJ - ADJ Help Picture Mode Contrast Bright Red Blue CLR Temp Bright Boost C.M.S. Setting C.M.S. DNR Lamp - Sharp XR-32X | XR-32S | XR-32X Operation Manual - Page 43
SCR - ADJ PRJ - ADJ Help Picture Mode Contrast Bright Standard 0 15 Red Blue CLR Temp Bright Boost C.M.S. Setting C.M.S. DNR Lamp Setting Reset 0 0 0 1 On Off Bright SEL./ADJ. Single ADJ END Useful Features Note • Menu buttons do not function while the projector is operating the "Auto Sync - Sharp XR-32X | XR-32S | XR-32X Operation Manual - Page 44
Mode Standard Contrast 0 Bright 0 Color 0 2 Tint 0 Sharp 0 Red 0 Blue 0 Q PAGE2 Menu operation n Page 38 Picture SCR - ADJ Picture Mode PRJ - ADJ Help Standard 3 CLR Temp 2 Bright Boost C.M.S. Setting 4 C.M.S. 5 Progressive 6 DNR 7 Lamp Setting Reset 0 1 On 3D - Sharp XR-32X | XR-32S | XR-32X Operation Manual - Page 45
For more contrast. For more brightness. For more color intensity. For making skin tones greenish. For more sharpness. For stronger red. For stronger blue. For making Page 38 4 Adjusting the Colors This function adjusts each of the six main colors that comprise the color wheel, altering their "Hue", - Sharp XR-32X | XR-32S | XR-32X Operation Manual - Page 46
24 frames/second. The projector can convert this film with minimal dot crawl and cross color noise. Lamp Setting Selectable items Eco + Quiet Bright Brightness and Power consumption Approx. 80% 100% Info • This function is available for 480I and 576I signals using COMPUTER/COMPONENT or DVI (XR-32X - Sharp XR-32X | XR-32S | XR-32X Operation Manual - Page 47
" Menu) Picture 1 Resize 2 Image Shift 3 Keystone SCR - ADJ PRJ - ADJ Border 0 0 4 OSD Display 5 Closed Caption 6 Background 7 Setup Guide 8 PRJ You can also press KEYSTONE on the remote control or on the projector to adjust Keystone Correction. 4 Setting the On-screen Display Selectable items - Sharp XR-32X | XR-32S | XR-32X Operation Manual - Page 48
, an independent US government agency. • Closed Caption may malfunction (white blocks, strange characters, etc.) if signal conditions are poor or if there are problems at the broadcast source. This does not necessarily indicate a problem with the projector. • If any button is pressed to call up the - Sharp XR-32X | XR-32S | XR-32X Operation Manual - Page 49
Adjusting the Projector Function ("PRJ - ADJ" Menu) Picture SCR - ADJ PRJ - ADJ Help 1 Auto Sync 2 Auto Power Off 3 Auto Restart 4 STANDBY Mode 5 System Sound 6 Speaker 7 Audio Input 8 RS-232C 9 Fan Mode 0 System Lock Lamp Timer(Life) 0h On On On Standard On On Audio 1 9600bps Normal - Sharp XR-32X | XR-32S | XR-32X Operation Manual - Page 50
keycode, the keycode cannot be canceled with the remote control. Info • If you lose or forget your keycode, contact your nearest Sharp Authorized Projector Dealer or Service Center (see page 65). Even if the product warranty is valid, the keycode reset will incur a charge. PRJ - ADJ Setting the - Sharp XR-32X | XR-32S | XR-32X Operation Manual - Page 51
lamp life may vary depending on the usage condition. • When the projector is in standby mode, you can release the keylock by holding down ENTER and STANDBY/ON on the projector simultaneously for about 5 seconds. Info • Keylock cannot be set while the projector is: displaying the "Setup Guide" or - Sharp XR-32X | XR-32S | XR-32X Operation Manual - Page 52
change, de- pending on the input signal or setting that you have selected. • If the problem is not solved, refer to "Troubleshooting" (see pages 63 and 64). • When selecting "sRGB" in "Picture Mode", the item "Color is faded or poor" is not displayed. This means you cannot change input signal types - Sharp XR-32X | XR-32S | XR-32X Operation Manual - Page 53
use volatile agents such as insecticides on the projector. Do not attach rubber or plastic items to the projector for long periods. The effects of some of agents in the plastic may cause damage to the quality or finish of the projector. ■ Wipe off dirt gently with a soft flannel cloth. ■ When the - Sharp XR-32X | XR-32S | XR-32X Operation Manual - Page 54
will illuminate in red. ■ If you try to turn on the projector a fourth time without replacing the lamp, the projector will not turn on. Indicators on the Projector Power indicator Red on Green on Red blinks Green blinks Lamp indicator Green on Green blinks Red on Temperature warning Off - Sharp XR-32X | XR-32S | XR-32X Operation Manual - Page 55
AC outlet, and then connect it again. • Carefully replace the lamp. (See page 52.) • Take the projector to your nearest Sharp Authorized Projector Dealer or Service Center (see page 65) for repair. • Please exercise care when replacing the lamp. • Securely install the cover. • If the power indicator - Sharp XR-32X | XR-32S | XR-32X Operation Manual - Page 56
a significant deterioration in the picture and color quality. The lamp life (percentage) can be checked with the on-screen display. (See page 47.) ■ Purchase a replacement lamp of type AN-F212LP from your place of purchase, nearest Sharp Authorized Projector Dealer or Service Center. IMPORTANT NOTE - Sharp XR-32X | XR-32S | XR-32X Operation Manual - Page 57
. • Unplug the power cord from the AC socket. • Leave the lamp until it has fully cooled down (about 1 hour). 3 Remove the lamp unit cover. • Turn the projector over. Loosen the user service screw (1) that secures the lamp unit cover. Remove the lamp unit cover (2). STANDBY/ON button AC socket User - Sharp XR-32X | XR-32S | XR-32X Operation Manual - Page 58
is connected to the projector. Securing screws Resetting the Lamp Timer Reset the lamp timer after replacing the lamp. Info • Make sure to reset the lamp timer only when replacing the lamp. If you reset the lamp timer and continue to use the same lamp, this may cause the lamp to become damaged or - Sharp XR-32X | XR-32S | XR-32X Operation Manual - Page 59
11. Not connected 12. Not connected 13. Not connected 14. Not connected 15. Not connected DVI-D Terminal : 24 pin connector (XR-32X only) 24 17 Pin No. Signal 1. T.M.D.S data 2- 2. T.M.D.S data 2+ 3. T.M.D.S data 2 shield 4. Not connected 5. Not connected 6. DDC clock 7. DDC data 8. Not - Sharp XR-32X | XR-32S | XR-32X Operation Manual - Page 60
RS CS CI Note • Depending on the controlling device used, it may be necessary to connect Pin 4 and Pin 6 on the controlling device (e.g. computer). Projector Pin No. 4 5 6 Computer Pin No. 4 5 6 USB Terminal : Type B USB connector 43 Pin No. Signal Name 1. VCC USB power 2. USB- USB data - Sharp XR-32X | XR-32S | XR-32X Operation Manual - Page 61
Problem response (communication error or incorrect command) O K Return code (0DH) E R R Return code (0DH) Info • When controlling the projector picture adjustment command and then receiving an "OK" response code, the projector in brackets under Control Contents. *1 For setting the projector name - Sharp XR-32X | XR-32S | XR-32X Operation Manual - Page 62
(Integer) T L T M _ _ _ 1 0, 15, 30, 45 T L T L _ _ _ 1 0% - 100%(Integer) T N A M _ _ _ 1 XR32X/XR32S M N R D _ _ _ 1 XR-32X/XR-32S P J N 1 * * * * OK or ERR P J N 2 * * * * OK or ERR P J N 3 * * * * OK or ERR P J N 0 _ _ _ 1 Projector Name I R G B _ _ _ 1 OK or ERR ERR I R G B _ _ _ 2 OK or - Sharp XR-32X | XR-32S | XR-32X Operation Manual - Page 63
Picture Mode Contrast Bright Red Blue Color Tint Sharp CLR Temp Bright Boost Progressive DNR Picture Reset Signal Type Audio Input Picture Mode Contrast Bright Red Blue Color Tint Sharp CLR Temp Bright Boost Progressive DNR Picture Standard Enhanced is only for XR-32X. COMMAND PARAMETER Power ON - Sharp XR-32X | XR-32S | XR-32X Operation Manual - Page 64
Color -30 - +30 Tint -30 - +30 Sharp -30 - +30 CLR Temp -1 - +1 Bright Boost 0 - +2 Progressive 2D Progressive 3D Progressive Film Mode DNR Off Level 1 Level 2 Picture 150 -30 - +30 -150 - +150 -60 - +60 is only for XR-32X. 60 COMMAND PARAMETER Power ON V A P S _ _ 1 0 OK or - Sharp XR-32X | XR-32S | XR-32X Operation Manual - Page 65
Reverse On Off Invert On Off English Deutsch Español Nederlands Français Italiano Svenska Português Setup Guide System Sound Internal Speaker RGB Frequency Check Fan Mode Lamp Timer Reset *3 polski Türkçe Magyer On Off On Off On Off Horizontal Vertical Normal High COMMAND PARAMETER - Sharp XR-32X | XR-32S | XR-32X Operation Manual - Page 66
is a list of modes that conform to VESA. However, this projector supports other signals that are not VESA standards. PC/MAC Resolution 640 × above. DTV Signal 480I 480P 540P 576I 576P 720P 720P 1035I 1080I 1080I * XR-32X only Horizontal Frequency (kHz) 15.7 31.5 33.8 15.6 31.3 37.5 45 - Sharp XR-32X | XR-32S | XR-32X Operation Manual - Page 67
Troubleshooting Problem No picture and no sound or projector does not start. Check • Projector power cord is not plugged into the wall outlet. • Power to the external connected devices is off. • The selected input mode is wrong. • Cables are incorrectly connected to the projector. • Remote control - Sharp XR-32X | XR-32S | XR-32X Operation Manual - Page 68
Troubleshooting (Continued) Problem Check Page An unusual sound is • If the picture is normal, the sound the remaining lamp life draws to a close, replace the lamp. Picture is dark. The remote control cannot be used. • Operate the remote control while pointing it at the projector's remote - Sharp XR-32X | XR-32S | XR-32X Operation Manual - Page 69
If you encounter any problems during setup or operation of this projector, first refer to the "Troubleshooting" section on pages 63 and 64. If this operation manual does not answer your question, please contact the SHARP Service departments listed below. U.S.A. Sharp Electronics Corporation 1-888 - Sharp XR-32X | XR-32S | XR-32X Operation Manual - Page 70
lamp Rated voltage Rated frequency Input current Power consumption (Standby) Operation temperature Cabinet Dimensions (main body only) [W × H × D] Weight (approx.) XR-32X XR-32S 0.55" DLP® Chip XGA (1024×768) SVGA (800×600) F 2.5 - 2.6 Manual, ×1.15 (f = 20.4 - 23.5 mm) Manual - Sharp XR-32X | XR-32S | XR-32X Operation Manual - Page 71
Dimensions Units: inches (mm) 1/4 (6) 10 7/16 (265) 13/32 (10) 1 31/64 2 5/8 (66.35) (37.65) 3 33/64 (89) 2 61/64 (75) 10 41/64 (270) 2 3/8 (60) M4 M4 M4 M4 13/32 (10) 13/32 (10) 2 61/64 (75) 1 27/64 (36) 1 3/16 (30) 1 15/16 (49) 4 7/64 (104) 67 Appendix - Sharp XR-32X | XR-32S | XR-32X Operation Manual - Page 72
41 Remote control 13 Remote control sensor 15 Replacing the lamp 52, 53 Resize 30, 43 RESIZE button 30 RGB cable 21 RS-232C terminal 24 SCR - ADJ 43 Screen Size and Projection Distance 20 Setup Guide 26, 44 Sharp 41 Speaker 45 SPOT button 32 STANDBY button 25 STANDBY Mode 45 STANDBY - Sharp XR-32X | XR-32S | XR-32X Operation Manual - Page 73
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
 |
 |
Introduction
Quick Start
Setup
Connections
Basic
Operation
Useful
Features
Appendix
OPERATION MANUAL
DATA PROJECTOR
MODEL
XR-32X
XR-32S
XR-32X