Sharp XR-32X XR-32S XR-32X Operation Manual - Page 36

Operating with the Remote Control BREAK TIMER button FREEZE button Displaying the Pointer MAGNIFY buttons POINTER button SPOT button Adjustment buttons (P/R/O/Q) EFFECT button PICTURE MODE button ECO+QUIET button AUTO SYNC button 1 Press POINTER and press P/R/ O/Q on the remote control to move the pointer. • Press EFFECT to change the pointer icon (5 types). 2 Press POINTER again. • The pointer will disappear. Using the Spot Function Displaying and Setting the Break Timer 1 Press BREAK TIMER. • The timer starts to count down from 5 minutes. On-screen display 1 Press SPOT and press P/R/O/Q on the remote control to move the spot area. • Press EFFECT to change the spot area size (3 types). 2 Press SPOT again. • The spot area will disappear. 2 Press P /R /O /Q to adjust the length of the break time. • Increases with P or Q 5 minutes s 6 minutes s 60 minutes • Shortens with O or R 4 minutes s 3 minutes s1 minute • The break time can be set in units of one minute (up to 60 minutes). Canceling the break timer display function Press BREAK TIMER. Note • Break Timer does not function while the pro- jector is operating the "Auto Sync", "FREEZE" or "AV MUTE" functions. Switching the Eco+Quiet Mode Press ECO+QUIET to switch the Eco+Quiet mode between on and off. • When the Eco+Quiet Mode is set to "ON", the sound of the cooling fan will turn down, the power consumption will decrease, and the lamp life will extend. Note • Refer to "Lamp Setting" on page 42 for de- tails of the Eco+Quiet mode. 32