Singer 1409 Promise Instruction Manual - Page 24

HEMMING Note. Hemmer foot can be purchased separately. 1. Raise the foot and the needle to its highest position. Replace the foot with the hemmer foot. 2. Fold over the fabric edge by about 3mm and place it under the foot. Secure tne folded edge with a few stitches. Take out the workplece and draw the hem into the hemmer foot by pulling the threads. 3. Lower the foot and sew the hem. 4. Durning sewing, fold the fadric to the left a little and allow it to run into the hemmer foot. 5. Make sure that the facric does not move under the right half or the foot, The fabric must be fed into the scroll of the hemmer sutficently so that the work piece edge runs freely through the groove under the foot. Only suitable materials can be used and some practice may be necessary to acneive best results. 21 - -