Singer 14SH654 Finishing Touch Instruction Manual 18 - Page 82
Turning, Square, Corners, Outside, Corner, Inside
View all Singer 14SH654 Finishing Touch manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
• Fold the fabric with the wrong sides together and sew. 1/. • Press the pin tucks in the same direction. Turning Square Corners (1) Outside Corner • Cut out approximately 2 cm (51/64 inch) from the corner, in line with the overedge seam edge. • Sew one stitch beyond point (A) and stop. • Raise needle and presser foot. • Pull the fabric to the rear of the machine just enough to release the thread caught on the finger of the throat plate. Note: Presser foot has been removed to show detail. Cutting line Corte 2 cm 2 cm • Turn the fabric and lower the presser foot so that the knife is positioned in line with the cut edge. • Pull slack threads up, then start to sew. (2) Inside Corner • Cut fabric at seam edge. 81 Cutting line Corte II Cut slit Corte