Singer C9920 Accessory User Guide - Page 13

UTILITY GARMENT SEWING INVISIBLE ZIPPER FOOT #250061696 M/C Code: MA, MC*, CB, CC, EC The Invisible Zipper Foot is used in applying a completely concealed closure in garments and home décor items-no stitching is visible on the outside of the fabric. The foot has a needle hole in the center and two grooves underneath to accommodate the zipper coils. Unlike a regular zipper, an invisible zipper is inserted before any part of the seam is stitched. 1. Open zipper and position the right side of the zipper face down on the right side of the garment. The zipper coil will be aligned on the stitching line with the tape part in the seam allowance. 2. Snap on the invisible zipper foot and position the zipper coil in the groove on the right side of the foot. 3. Stitch from the top of the seam until the zipper foot hits the pull tab at the bottom and backstitch. (Do not stretch the fabric.) 4. Position the other side of the open zipper face down on the left side. The zipper coil will be aligned on the stitching line with the tape part in the seam allowance. 5. The zipper coil will be positioned in the groove on the left side of the foot. 6. Stitch from the top of the seam until the zipper foot hits the pull tab at the bottom and backstitch. (Do not stretch the fabric.) 7. Close the zipper. 8. Replace invisible zipper foot with regular zipper foot and stitch the remainder of the seam. 9. At the lower edge of the zipper, stitch each side of the zipper tape flat to the seam allowances only. #250040996 M/C Code: CD Note: If the garment has a horizontal seam or design in the fabric that needs to match, be sure to align and pin or baste the zipper before stitching. *Models 4208 and 4212 require the optional universal shank part #250052596 13