Snapper RE100 Operater's Manual - Page 31

Maintenance Battery Charging A. Place the battery in a well-ventilated area. B. Connect a 12-volt constant-voltage battery charger to the battery terminals; RED to positive (+) and BLACK to negative (-) terminal. C. Charge the battery for 2 to 4 hours. ! WARNING ! The battery on this unit requires the use of a constant voltage (CV) battery charger designed for valve regulated (sealed) non-spillable batteries. Attempting to use a standard battery charger may result in damage to the battery. DO NOT use "BOOST" chargers on the battery. DO NOT attempt to charge the battery while installed on the unit. Battery Storage If the mower is to be stored out of season on its rear bumper, it is recommended the battery be removed, charged and stored. r n 1. Remove the battery. Refer to the section entitled fo tio "BATTERY REMOVAL". 2. Charge the battery. Refer to the section entitled "BATTERY CHARGING". t c 3. Store the battery in an area away from the rider on a wood surface. DO NOT STORE THE BATTERY ON A RNeoprodu CONCRETE SURFACE. 31