Sony BDP-S1000ES Operating Instructions - Page 33
Setting wireless LAN (Access point scan), Select Wireless, and press ENTER.
UPC - 027242765788
View all Sony BDP-S1000ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Hookups and Settings 14 Check the settings, and select "Finish," then press ENTER. The message "Settings are complete." appears. If an error message appears in the network diagnostic results, check the message. Then, set the network settings again or perform the network diagnostic again. Setting wireless LAN (Access point scan) Use the following procedure when you connect the player to a wireless LAN router (access point) that is Wi-Fi Protected Setupcompatible without security set or not Wi-Fi Protected Setup-compatible. 1 Follow steps 1 and 2 of "Step 4: Connecting to the Network" on page 25. 2 Check the SSID and the security key on the setting screen of your wireless LAN router (access point). For information about how to use the setting screen of the wireless LAN router (access point), visit the following website or consult the manufacturer of the wireless LAN router (access point): http://www.sony.com/blurayupdate - Security type: For details on the type of security that can be used on this player, see "About Wireless LAN Security" on page 77. - Security key: The wireless LAN router (access point) has a WEP or WPA key according to the selected security type. z WEP or WPA key may be displayed as "passphrase" or "network key" depending on the wireless LAN router (access point). 3 Press HOME. 4 Select (Setup) using