Sony BDP-S1000ES Operating Instructions - Page 57
Audio DRC, Downmix, Settings and Adjustments
UPC - 027242765788
View all Sony BDP-S1000ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Settings and Adjustments b • If you select "96kHz/24bit" when an AV amplifier (receiver) that does not support 96 kHz is connected, no sound or a loud sound may result. • "48kHz/96kHz PCM" is not effective when "Audio Output Priority" is set to "HDMI," "Multi Channel Analog," or "Stereo Analog." Audio DRC Selects the dynamic range (compression level of the sound) setting when playing a BD or DVD that conforms to "Audio DRC." Auto Standard TV Mode Wide Range Performs playback at the dynamic range specified by the disc (BD-ROM only). Other discs are played back at the "Standard" level. Performs playback at a compression level between "TV Mode" and "Wide Range." Sounds are compressed heavily. Low sounds are easier to hear. No compression works. A more dynamic sound is produced. b • "Audio DRC" is effective only when playing Dolby Digital, Dolby Digital Plus, and Dolby TrueHD audio signals. • When "Dolby Digital" is set to "Dolby Digital" in the "Audio Settings" setup (page 56), "Audio DRC" has no effect on the audio output from the DIGITAL OUT (OPTICAL/COAXIAL) jack. However, this excludes the following cases. - when "BD Audio Setting" is set to "Mix" when playing a BD. - when "Audio Output Priority" is set to "HDMI," "Multi Channel Analog," "Stereo Analog," or "Headphones." Downmix Sets the downmix method of multi-channel to two-channel sound. Dolby Surround Normal Outputs the Dolby Surround (Pro Logic) signals in 2 channels. Select this when connecting an audio device that supports Dolby Surround (Pro Logic). Outputs audio signals without Dolby Surround (Pro Logic) effect. Select this when connecting an audio device that does not support Dolby Surround (Pro Logic). b "Downmix" has no effect on the bitstream audio output from the DIGITAL OUT (OPTICAL/ COAXIAL)/HDMI OUT jack. 57