Sony CMT-CPX22 Operating Instructions - Page 7

Inserting two R6 size AA, batteries into the remote, Attaching the speaker pads, Getting Started

Page 7 highlights

Getting Started AM CFOMA7X5IAΩL AM loop antenna Extend the FM lead antenna horizontally Note Keep the antennas away from the speaker cords. 3 For models with a voltage selector, set VOLTAGE SELECTOR to the local power line voltage. Refer to the print on your system's VOLTAGE SELECTOR for available settings. Inserting two R6 (size AA) batteries into the remote Note If you do not use the remote for a long period of time, remove the batteries to avoid possible damage from battery leakage and corrosion. Tip With normal use, the batteries should last for about six months. When the remote no longer operates the system, replace both batteries with new ones. Attaching the speaker pads Attach the supplied speaker pads to the bottom of the speakers to stabilize the speakers and prevent them from slipping. * Saudi Arabian model: 120 - 127 V 4 Connect the power cord to a wall outlet. The demonstration appears in the display. When you press ?/1, the system turns on and the demonstration automatically ends. If the plug does not fit the wall socket, detach the supplied plug adaptor (only for models equipped with an adaptor). When carrying this system Perform the following procedure to protect the CD mechanism. Use buttons on the unit for the operation. 1 Make sure that all discs are removed from the system. 2 Press CD. 3 Hold down x and then press CD until "LOCK" appears. 4 Unplug the power cord. 7GB

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36

Getting Started
7
GB
Note
Keep the antennas away from the speaker cords.
3
For models with a voltage selector, set
VOLTAGE SELECTOR to the local
power line voltage.
Refer to the print on your system’s
VOLTAGE SELECTOR for available
settings.
* Saudi Arabian model: 120 – 127 V
4
Connect the power cord to a wall
outlet.
The demonstration appears in the display.
When you press
?/1
, the system turns on
and the demonstration automatically ends.
If the plug does not fit the wall socket,
detach the supplied plug adaptor (only for
models equipped with an adaptor).
Inserting two R6 (size AA)
batteries into the remote
Note
If you do not use the remote for a long period of time,
remove the batteries to avoid possible damage from
battery leakage and corrosion.
Tip
With normal use, the batteries should last for about six
months. When the remote no longer operates the
system, replace both batteries with new ones.
Attaching the speaker pads
Attach the supplied speaker pads to the bottom
of the speakers to stabilize the speakers and
prevent them from slipping.
AM
FM 75
COAXIAL
Extend the FM lead antenna horizontally
AM loop antenna
When carrying this system
Perform the following procedure to protect
the CD mechanism.
Use buttons on the unit for the operation.
1
Make sure that all discs are removed
from the system.
2
Press CD.
3
Hold down
x
and then press CD until
“LOCK” appears.
4
Unplug the power cord.