Sony CMT-EX1 Operating Instructions - Page 11

Basic Operations 1 Press TUNER/BAND repeatedly until the band you want appears. Each time you press the button, the band changes as follows: FM y AM AUTO TUNED STEREO MHz 2 Press TUNING MODE repeatedly until "PRESET" appears. PRESET TUNED STEREO MHz 3 Press l/L to select the desired station's preset number. PRESET TUNED STEREO MHz To cancel the Automatic Tuning Press TUNING MODE. Tips • You can switch from another source to the tuner by pressing TUNER/BAND (Automatic Source Selection). • If you press TUNER/BAND while the power is off, the power turns on and the system tunes in the last received station automatically (One Touch play). • To improve broadcast reception, reorient the supplied antennas or connect an optional external antenna. • When an FM program has static noise, press STEREO/MONO until "MONO" appears. There will be no stereo effect, but the reception will improve. Press again to restore the stereo effect. To Turn off the radio Adjust the volume Do this Press "/1 to turn off the system. Press VOL +/-. To listen to non-preset radio stations • Press TUNING MODE repeatedly until "MANUAL" appears in step 2, then press +/- (or TUNING +/- on the unit) repeatedly to tune in the desired station (Manual Tuning). • Press TUNING MODE repeatedly until "AUTO" appears in step 2, then press +/- (or TUNING +/- on the unit). The frequency indication changes and scanning stops when the system tunes in a station (Automatic Tuning). 11