Sony CMT-EX1 Operating Instructions - Page 6

Step 2: Setting the time You must set the time before you can use the timer functions. The clock is on a 24-hour system for the European model, and a 12-hour system for other models. The 24-hour system model is used for illustration purpose. Set the time before turning the power on. 3 Press +/- to set the hour then press ENTER. The minute indication flashes. 4 Press +/- to set the minute then press ENTER. The clock starts. DISPLAY 2,3,4 1 2,3,4 1 Press TIMER SET while the power is off. The day indication flashes after "CLOCK SET" flashing. To change the time You can change the preset time while the power is on. 1 Press TIMER SET. 2 Press +/- repeatedly until "CLOCK SET" appears then press ENTER. 3 Repeat steps 2 to 4. To show the time You can display the clock any time. Press DISPLAY repeatedly until the clock display appears. Tips • If you have made a mistake, start over from step 1. • The built-in clock shows the time in the display while the power is off. • The upper dot flashes for the first half of a minute (0 to 29 seconds), and the lower dot flashes for the last half of a minute (30 to 59 seconds). 2 Press +/- to set the day then press ENTER. The hour indication flashes. 6