Sony CMT-M70 Primary User Manual - Page 14

Recording to a tape (continued) Recording CD tracks in your favorite order -- Program Edit 1 Load a recordable tape into the cassette holder. 2 Load a CD onto the disc tray. 3 Press FUNCTION repeatedly until "CD" appears in the display. 4 Press PLAY MODE/TUNING MODE (or TUNING MODE/PLAY MODE on the remote) repeatedly until "PGM" appears in the display. 5 Press l/L (or ./> on the remote) repeatedly until the desired track number appears in the display. 6 Press PLAY MODE/TUNING MODE (or TUNING MODE/PLAY MODE on the remote). The selected track is programmed. The selection number appears in the display. To program additional tracks, repeat steps 5 and 6. 7 Press CD SYNCHRO. The tape stands by for recording and the CD stands by for playback. " " and "B" (or "b") appear, and the CD SYNCHRO indicator lights up. To start recording on the side facing away from you, press TAPE nN until " " changes to " ." 8 Press DIRECTION (or DIR MODE on the remote) repeatedly to select " " to record on one side of the tape, or " " or " " to record on both sides. 9 Press TAPE X. To Stop recording Cancel Program Edit 14GB Do this Press x. Press PLAY MODE/TUNING MODE (or TUNING MODE/ PLAY MODE on the remote) repeatedly until "PGM" disappears from the display. To place a specific number of tracks on each side of the tape during CD Synchro Recording 1 Program the tracks for the first side by doing steps 1 to 6. 2 Press X on the remote. 3 Program the tracks for the other side by doing steps 5 and 6. 4 Do steps 7 to 9 (see Note below). When the X command is detected during CD Synchro Recording, the CD will pause, the first side of the tape will continue running till it ends, the tape will reverse direction, the CD will play and recording of the remaining tracks will resume on the other side of the tape. Note To enable two-sided recording, you must select " " or " " in step 8 on the left. Timer-recording radio programs To timer-record, make sure that you have set the system clock correctly (see "Setting the clock" on page 7) and preset the radio station (see "Presetting radio stations" on page 9). 1 Tune in the desired preset radio station (see "Listening to the radio" on page 11). 2 Load a recordable tape. 3 Press TIMER SET on the remote. 4 Press ./> on the remote repeatedly until "SET REC" appears in the display. "SET REC" scrolls and "c REC" appears in the display. 5 Press ENTER on the remote. "ON TIME" appears, then the hour indication flashes.