Sony CMT-U1BT Operating Instructions - Page 27

Messages, To improve tuner reception, To reset the system to factory settings, CD/ATRAC/MP3 player

Get Sony CMT-U1BT - Micro Hi-fi Component System PDF manuals and user guides View all Sony CMT-U1BT manuals
Add to My Manuals
Save this manual to your list of manuals

Page 27 highlights

To improve tuner reception Turn off CD player power by using the CD power management function. By default, CD power is turned on. You cannot change the setting in Power Saving Mode. Use buttons on the unit to turn off CD player power. 1 Press FUNCTION  repeatedly to select the CD function, and then turn off the system. 2 After "STANDBY" stops flashing, press /  while holding down  . "CD POWER OFF" appears. With CD player power turned off, disc access time is increased. To turn on CD player power, repeat the procedure until "CD POWER ON" appears. To reset the system to factory settings If the system still does not operate properly, reset the system to factory settings. You cannot reset the system to factory settings in Power Saving Mode. Use buttons on the unit to reset the system to its factory default settings. 1 Disconnect and reconnect the power cord, and then turn on the system. 2 Press DSGX  and at the same time. All user-configured settings, such as preset radio stations, timer, and the clock, are deleted. Messages CD/ATRAC/MP3 player, Tuner Complete!: The preset operation ended normally. LOCKED: The system does not eject the disc. Contact your nearest Sony dealer. No Disc: There is no disc in the system, or you have loaded a disc that cannot be played. No Step: All of the programmed tracks or files have been erased. Not in Use: You pressed an invalid button. OFF TIME NG!: The Play Timer start and end times are set to the same time. Over: You have reached the end of the disc while pressing   during playback or pause. Push SELECT!: You tried to set the clock or timer during timer operation. Push STOP!: You pressed PLAY MODE  during playback. Reading: The system is reading information of the disc. Some buttons are not available. SET CLOCK!: You tried to select the timer when the clock is not set. SET TIMER!: You tried to select the timer when the Play Timer is not set. Step Full!: You tried to program more than 26 tracks or files (steps). Others  Continued 27GB

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
±µ
GB
Others
To improve tuner reception
Turn off CD player power by using the CD
power management function. By default, CD
power is turned on. You cannot change the
setting in Power Saving Mode.
Use buttons on the unit to turn off CD player
power.
1
Press FUNCTION
repeatedly to select
the CD function, and then turn off the
system.
2
After “STANDBY” stops flashing, press
/
while holding down
.
“CD POWER OFF” appears. With CD
player power turned off, disc access time
is increased. To turn on CD player power,
repeat the procedure until “CD POWER
ON” appears.
To reset the system to factory settings
If the system still does not operate properly,
reset the system to factory settings. You cannot
reset the system to factory settings in Power
Saving Mode. Use buttons on the unit to reset
the system to its factory default settings.
1
Disconnect and reconnect the power cord,
and then turn on the system.
2
Press DSGX
and
/
at the same
time.
All user-configured settings, such as preset
radio stations, timer, and the clock, are
deleted.
Messages
CD/ATRAC/MP3 player, Tuner
Complete!
: °e preset operation ended
normally.
LOCKED
: °e system does not eject the disc.
Contact your nearest Sony dealer.
No Disc
: °ere is no disc in the system, or you
have loaded a disc that cannot be played.
No Step
: All of the programmed tracks or files
have been erased.
Not in Use
: You pressed an invalid button.
OFF TIME NG!
: °e Play Timer start and end
times are set to the same time.
Over
: You have reached the end of the disc
while pressing
during playback or
pause.
Push SELECT!
: You tried to set the clock or
timer during timer operation.
Push STOP!
: You pressed PLAY MODE
during playback.
Reading
: °e system is reading information of
the disc. Some buttons are not available.
SET CLOCK!
: You tried to select the timer when
the clock is not set.
SET TIMER!
: You tried to select the timer when
the Play Timer is not set.
Step Full!
: You tried to program more than 26
tracks or files (steps).
Continued