Sony CPF-NW001P Quick Setup Guide - Page 1
Sony CPF-NW001P - Main Component Of Cpf-ix001 Wireless Network Audio System Manual
View all Sony CPF-NW001P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
CPF-IX001 Quick Setup Guide 2-892-537-12(2) © 2006 Sony Corporation Printed in Malaysia This Quick Setup Guide explains the preparation needed to enjoy music with the CPF-IX001. For details on each step, refer to the Operating instructions in the supplied CD-ROM. CPF-IX001 Operating Instructions for details on how to operate the CPF-IX001 M-crew Server Installation instructions for details on how to install the M-crew Server M-crew Server Help (Use after installing the M-crew) for details on how to operate the M-crew Server Check the following website for the CPF-IX001 latest information, FAQ (Frequently Asked Questions), and firmware updates; USA: http://esupport.sony.com/?ref=http%3A//www.sony.com/index.php Canada: http://www.sony.ca/sonyca/view/english/warranty/consumer_support. shtml Europe: http://support.sony-europe.com/main/main.asp?l=en Notes When using the CPF-IX001 with a wireless network, you need a wireless LAN router (access point, not supplied) A wireless connection (ad-hoc) cannot be made directly with a computer. Step 1 Install the M-crew Server Ver. 2.0 software and prepare the CPF-IX001. 1 Make sure that you have all the following items, which are required for setup. Main unit (CPF-NW001P) Network unit (NAS-IX001P) Subwoofer (SA-NW001P) Network cable for the CPF-IX001 Remote commander (RM-ANU007) M-crew Server Ver. 2.0 software CD-ROM 2 Insert the supplied M-crew Server Ver. 2.0 software CD-ROM into your computer. The "M-crew Server SETUP" window appears. Follow the instructions on the screen and install the software. Select language Click to install Notes If the window does not open, double-click the CD-ROM "Setup.exe" icon. With some computer environments, you may need to set the Windows and security software firewall. If the "Windows Security Alert" window appears, click [Unblock] to unblock the program. Setup Procedure Wireless settings for the CPF-IX001 must be made from a computer that has a wired connection with the CPFIX001. Be sure to perform the settings by following the procedure below. Step 1 Installing M-crew Server Step 2 Setting a wired connection Step 3 Setting a wireless connection If the "ICF SETTINGS" window automatically appears, click [Apply], and "OK" appears for all status items, then click [Close]. 3 Prepare the remote. Pull out the insulating sheet. 4 Install the CPF-IX001. Connect the network unit on the main unit, and connect the subwoofer to the DC IN jack on the back of the main unit. To DC IN jack Main unit Network unit To the wall outlet Subwoofer Note Be sure to turn off the subwoofer when connecting or disconnecting the network unit. Step 2 The CPF-IX001 wireless settings are made using the browser, so first establish a wired connection between the CPF-IX001 and your computer. 1 Connect the CPF-IX001 to the network using a wired connection. Connect the CPF-IX001 to your router (hub) or directly to the LAN port of the computer. Use the supplied network cable. Check that the WIRELESS/WIRED selector on the network unit is set to WIRED. WIRELESS/WIRED selector Network cable (supplied) To router (hub) or LAN port of the computer To LAN port Note When using the CPF-IX001 with a fixed IP address, refer to "Advanced network settings" in the Operating Instructions. 2 Turn on the system. Power switch Note The demonstration display appears on the network unit. If it does not appear, check the connection (Step 1-4). 3 Press FUNCTION repeatedly until the LINE indicator on the main unit turns off. FUNCTION SUSPEND 4 Press SUSPEND to start up the network unit. The model name appears in the display and the connection starts. "Configuring" flashes and the network is configured. Note When connected one-to-one with a computer without using a router, it takes a few minutes to configure the network. In addition, a warning message appears on the computer to advise that the connection is restricted. 5 Press and check that music or sample music is played. It may take some time until music playback starts depending on the network status. During the sample music playback, the following appears in the display. Note If "SERVER?" appears, select the M-crew server according to the following procedure. 1 Press ENTER. 2 Press or repeatedly until "M-crew v2 on XXXX (your com- puter name)" appears, then press ENTER. This completes the settings when using the CPF-IX001 with a wired connection. When using the CPF-IX001 with a wireless connection, press to stop music playback, then proceed to Step 3. Continued