Sony CSS-PC1 Operating Instructions - Page 13

Connecting the camera to your computer via the Cyber-shot Station 1 Connect the Cyber-shot Station to your computer by the USB cable supplied with the Cyber-shot Station. Care and maintenance Clean the Cyber-shot Station with a soft cloth slightly moistened with water, and wipe the surface with a dry cloth. Do not use any type of solvent such as thinner, alcohol or benzine as this may damage the surface. USB cable 2 Turn on your camera. The USB connection between the camera and your computer will be established. Then you can transfer image data to your computer. For further details, refer to the operating instructions supplied with the camera. When the Cyber-shot Station is communicating with your computer using the USB cable, do not remove the camera from the Cyber-shot Station. Removing the camera may damage the image data. To cancel the USB connection Disconnect the USB cable or turn off the computer. - For further details, refer to the operating instructions supplied with the camera. 13-GB