Sony D-FJ401 Operating Instructions (primary manual) - Page 21

Connecting to a power source, Using the rechargeable batteries

Page 21 highlights

B Connecting to a power source You can use the following power sources: • Rechargeable batteries • AC power adaptor (see "Playing a CD") • LR6 (size AA) alkaline batteries For the battery life and charging time of the rechargeable batteries, see "Specifications." 3 Connect the AC power adaptor to the DC IN 4.5 V jack of your CD player and an AC outlet, then press x/CHG to start charging. x/CHG button Using the rechargeable batteries Charge the rechargeable batteries before using them for the first time. You can use only the following rechargeable batteries for your CD player. • NC-WMAA • NH-WM2AA (NH-WMAA × 2) 1 Open the battery compartment lid inside your CD player. to DC IN 4.5 V AC power adaptor Connecting to a power source 2 Insert two rechargeable batteries by matching the 3 to the diagram in the battery compartment and close the lid until it clicks into place. to an AC outlet The CD player charges the batteries. The indicator sections of light up in succession. When the batteries are completely charged, the indicator turns off. If you press x/CHG after the charge has already been completed, the indicator flashes and "Full" appears in the display. 4 Disconnect the AC power adaptor. Insert the #end first (for both batteries). (Continued) 21

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32

21
You can use the following power sources:
Rechargeable batteries
AC power adaptor (see “Playing a CD”)
LR6 (size AA) alkaline batteries
For the battery life and charging time of the
rechargeable batteries, see “Specifications.”
Using the rechargeable
batteries
Charge the rechargeable batteries before
using them for the first time. You can use
only the following rechargeable batteries for
your CD player.
• NC-WMAA
NH-WM2AA (NH-WMAA
×
2)
1
Open the battery compartment lid
inside your CD player.
2
Insert two rechargeable batteries
by matching the
3
to the diagram
in the battery compartment and
close the lid until it clicks into
place.
3
Connect the AC power adaptor to
the DC IN 4.5 V jack of your CD
player and an AC outlet, then
press
x
/CHG to start charging.
The CD player charges the batteries. The
indicator sections of
light up in
succession. When the batteries are
completely charged, the
indicator
turns off.
If you press
x
/CHG after the charge has
already been completed, the
indicator flashes and “Full” appears in
the display.
4
Disconnect the AC power adaptor.
B
Connecting to a power source
to an AC outlet
to DC IN 4.5 V
AC power adaptor
x
/CHG button
Insert the
#
end first
(for both batteries).
Connecting to a power source
(Continued)