Sony D-NE300 Operating Instructions - Page 34
MP3 CD, the CD does, display after you press - atrac3plus
UPC - 027242640436
View all Sony D-NE300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Troubleshooting Symptom "HOLD" flashes in the display when you press a button, and the CD does not play. Playback starts from the point you stopped. (resume function) Rustling noise is heard from the CD. During playback of an ATRAC CD or MP3 CD, the CD does not rotate but you can hear the sound normally. "NO FILE" appears on the display after you press u/ ENTER or when the lid of the CD player is closed. When closing the lid of the CD player, the CD starts to rotate. The LCD display becomes hard to see or slows down. Play is stopped abruptly. Cause and/or corrective action c The buttons are locked. Slide the HOLD switch back. (page 23) c The resume function is working. To start play from the first track, press and hold u/ENTER during stop until the first track starts playing, or open the lid of the CD player. Or remove all power sources, then insert the batteries or connect the AC power adaptor again. (pages 13, 14, 28) c Close the lid of the battery compartment firmly. (page 28) c The CD player is designed to stop the rotation of an ATRAC CD or MP3 CD during playback to reduce the power consumption. The player is not malfunctioning. c There are no ATRAC3plus/ATRAC3/MP3 files in the CD. c A CD-R/RW from which the data has been erased is being used. c The CD is dirty. c The CD player is reading the information on the CD. The player is not malfunctioning. c You are using your CD player at high temperatures (above 40°C/ 104°F) or at low temperatures (below 0°C/32°F). At room temperature, the display will return to its normal operating condition. c OFF TIMER has been set. Change the setting to "OFF." 34