Sony DAV-FX10 Operating Instructions - Page 18
Hang the speakers on the screws., The screws should protrude 8 to 9 mm 11/32 to 3/8 inch.
View all Sony DAV-FX10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
25 mm (1 inch) 4 mm (5/32 inch) 4.6 mm (3/16 inch) 10 mm (13/32 inch) Hole on the back of the speaker 2 Fasten the screws to the wall. The screws should protrude 8 to 9 mm (11/32 to 3/8 inch). 8 to 9 mm (11/32 to 3/8 inch) 3 Attach the wall-mount pads on the rear side of the speaker. Wall-mount pads (7 × 7 mm, 3 mm thick) (9/32 × 9/32 inch, 1/8 inch thick) 4 Hang the speakers on the screws. 4.6 mm (3/16 inch) 10 mm (13/32 inch) Hole on the back of the speaker Note • Use screws that are suitable for the wall material and strength. As a plaster board wall is especially fragile, attach the screws securely to a beam and fasten them to the wall. Install the speakers on a vertical and flat wall where reinforcement is applied. 18US
18
US
2
Fasten the screws to the wall.
The screws should protrude 8 to 9 mm (11/32 to 3/8 inch).
3
Attach the wall-mount pads on the rear side of the speaker.
4
Hang the speakers on the screws.
• Use screws that are suitable for the wall material and strength. As a plaster board wall is especially fragile, attach
the screws securely to a beam and fasten them to the wall. Install the speakers on a vertical and flat wall where
reinforcement is applied.
Note
25 mm (1 inch)
4 mm (
5
/
32
inch)
Hole on the back of
the speaker
4.6 mm
(
3
/
16
inch)
10 mm
(
13
/
32
inch)
8 to 9 mm
(
11
/
32
to
3
/
8
inch)
Wall-mount pads
(7 × 7 mm, 3 mm thick)
(
9
/
32
×
9
/
32
inch,
1
/
8
inch thick)
4.6 mm
(
3
/
16
inch)
10 mm
(
13
/
32
inch)
Hole on the back of
the speaker