Sony DAV-FX500 Operating Instructions - Page 72
Press, to select [YES], then press, to select [YES] or [NO], The measurement is OK., A.CAL MIC
View all Sony DAV-FX500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
face the calibration mic, and there should be no obstruction between the speakers and the calibration mic. Be quiet during the measurement. A.CAL MIC Calibration mic • If an error message appears, follow the message, then select [YES]. An error message appears when: - the headphones are connected. - the calibration mic is not connected. - front speakers are not correctly connected. - surround speakers are not correctly connected. - front and surround speakers are not correctly connected. - subwoofer is not connected. 6 Press C/X/x/c to select [YES] or [NO], then press . x The measurement is OK. Disconnect the calibration mic, then select [YES]. The result is implemented. Measurement complete. FRONT L : 16ft 4.8m 0.0dB FRONT R : 16ft 4.8m 0.0dB CENTER : 16ft 4.8m + 1.0dB SUBWOOFER : 16ft 4.8m + 4.0dB SURROUND L : 10ft 3.0m - 2.0dB SURROUND R : 10ft 3.0m - 2.0dB If OK, unplug calibration mic and select YES. YES NO 5 Press X/x to select [YES], then press . Calibration starts. Measuring. Please wait a moment. 72US Note • Avoid being in the measurement area and making noise during the measurement (about 1 minute), to avoid measurement failure. During the measurement, test signals are output from the speakers. • Reflections from walls or the floor may affect measurements. x The measurement is not OK. Follow the message, then select [YES] to retry. Measurement failure. Check speaker connection. Retry? YES NO Tip • You can check the distance between the listening position and each speaker. See page 78. Note • While the Auto Calibration function works: - do not turn off the power. - do not press any button. - do not change the volume. - do not change the function. - do not change the disc. - do not insert or eject a disc. - do not connect the headphones. - do not disconnect the calibration mic.