Sony DCR PC101 Operating Instructions - Page 101

Editing Inserting a scene from a VCR - Insert editing 4 ZERO SET MEMORY 0:00:00 ZERO SET MEMORY 5,6 FN REC CTRL RET. REC PAUSE REC START To change the insert end point Press ZERO SET MEMORY again after step 5 to erase the ZERO SET MEMORY indicator and begin from step 3. Note The picture and sound recorded on the section between the insert start and end points will be erased when you insert the new scene. If you insert scenes on the tape recorded with other camcorder (including other DCR-PC101) The picture and sound may be distorted. We recommend that you insert scenes on a tape recorded with your camcorder. When the inserted picture is played back The picture and sound may be distorted at the end of the inserted section. This is not a malfunction. The picture and sound at the start point and the end point may be distorted in the LP mode. To insert a scene without setting the insert end point Skip step 3 and 4. Press x on the Remote Commander or you want to stop inserting. on your camcorder when If you press FN The ZERO SET MEMORY indicator is not displayed. 101