Sony DCR-SR68 Handycam® Handbook - Page 12
Connect the AC Adaptor and the power cord mains lead to your, jack of your camcorder.
UPC - 027242788701
View all Sony DCR-SR68 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
You can charge the "InfoLITHIUM" battery pack (V series) after attaching it to your camcorder. Notes You cannot attach any "InfoLITHIUM" battery pack other than the V series to your camcorder. 1 Turn off your camcorder by closing the LCD screen. 2 Attach the battery pack by sliding it in the direction of the arrow until it clicks. 3 Connect the AC Adaptor and the power cord (mains lead) to your camcorder and the wall outlet (wall socket). Align the mark on the DC plug with that on the DC IN jack. The CHG (charge) lamp lights up and charging starts. The CHG (charge) lamp turns off when the battery pack is fully charged. 4 When the battery is charged, disconnect the AC Adaptor from the DC IN jack of your camcorder. Tips See page 80 on recording and playing time. When your camcorder is on, you can check the approximate amount of remaining battery power with the remaining battery indicator at the upper left on the LCD screen. Charging time Approximate time (min.) required when you fully charge a fully discharged battery pack. Battery pack NP-FV30 (supplied) NP-FV50 NP-FV70 NP-FV100 Charging time 115 155 195 390 Times measured with the camcorder at 25 C (77 °F). 10 C to 30 C (50 °F to 86 °F) is recommended. US 12