Sony DPP FP97 Operating Instructions - Page 70
Settings, Edit - Red-eye Correction.
UPC - 027242764835
View all Sony DPP FP97 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Symptom Check Even though - "Borderless" is selected in the Print setup, the image is printed with borders on both sides. The whole area of • Did you set "Pattern 1" in an image cannot the Print setup menu? be printed. The image is • Is the paper tray inserted printed at an angle. properly? There are white - lines or dots on the printed pictures. The picture is too - bright, dark, reddish, yellowish, or greenish. Red-eye correction - does not take effect with AUTO TOUCH-UP button. Red-eye correction does not take effect with "Redeye Correction" menu. - • Did you enlarge, reduce the size of, rotate, or move an image after red-eye correction? Cause/Solutions c When you use a device other than the printer to edit or save an image, blank areas around an image are also saved as part of image data. Even if you print such data with "Borderless" setting, you cannot eliminate the borders on both sides of a print. (.page 41) c You can print the whole area of an image by selecting "Pattern 1" in the Print setup menu. (.page 41) c Re-insert the paper tray firmly straight in to the end. c The print head or paper path may be soiled. Use the supplied cleaning cartridge and sheet to clean the head and path. (.page 77) c Adjust the image by pressing MENU button and then selecting Edit- Adjust. (.page 22) c Adjust for the red-eye phenomenon by pressing MENU button and then selecting Edit - Red-eye Correction. (.page 24) c Set the size of the adjustment frame to be two to seven times as large as the eye. (.page 24) c Red-eye correction may not work properly if other editorial operations such as enlarging, reducing the size of, rotating, or moving an image. Perform these editorial operations first and then perform red-eye correction. Settings Symptom The "Borderless" and "Pattern 1/2" setting does not take effect. Check • Are you operating the CreativePrint menu? Cause/Solutions c In the CreativePrint menu, templates are used and you cannot select border/ borderless prints. 70 GB