Sony DSC P1 Operating Instructions - Page 11
Using the AC power adaptor, AC-LS1A AC power adaptor, Jack cover, To the wall outlet mains, Power cord
UPC - 027242581364
View all Sony DSC P1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Getting started Notes • The battery life and number of images will be decreased if you use your camera at low temperatures, use the flash, repeatedly turn the power on/off or use the zoom. • The capacity of the "Memory Stick" is limited. The figures in the table are a guide when you continuously record/play back while replacing the "Memory Stick appears in the display window until the battery usable time is calculated. • During charging, the indicators in the display window may not appear correctly or may flash in the following cases. - When the battery pack is not installed correctly. - When the battery pack has malfunctioned. • When you turn the LCD screen on and off, it takes about one minute for the correct battery remaining time to appear. • If the power may go off although the battery remaining indicator indicates that the battery pack has enough power to operate, charge the battery pack fully again so that the indication on the battery remaining indicator is correct. • Use the AC power adaptor near the wall outlet (mains). If any trouble occurs while using the camera, immediately unplug the power cord from the wall outlet (mains) to cut off the power. • Do not short the DC plug of the AC power adaptor with a metallic object, as this may cause malfunction. • Do not expose the battery pack to water. • When the battery pack will not be used for a long time, charge the battery pack once fully, and use it in PLAY mode until it completely discharges. Keep the battery pack in a cool place. • Battery life will be shorter when you record with the LCD screen ON. We recommend that you turn the LCD screen OFF. Using the AC power adaptor Jack cover To the wall outlet (mains) Power cord (mains lead) AC-LS1A AC power adaptor 1 Open the jack cover and connect the DC connecting cable to the DC IN jack of your camera with the v mark facing up. 2 Connect the power cord (mains lead) to the AC power adaptor and then to a wall outlet (mains). 11