Sony DSC P9 Operating Instructions - Page 10
Getting started, Charging the battery pack, connect the AC-LS1A AC
UPC - 027242607040
View all Sony DSC P9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Charging the battery pack Getting started OPEN 1 , Open the battery/"Memory Stick" cover. Slide the cover in the direction of the arrow. • When charging the battery pack, make sure the camera is not turned on (page 14). • The camera operates only with the "InfoLITHIUM" battery NP-FC10 battery pack (C type) (supplied). You cannot use any other battery pack (page 95). 2 Battery eject lever , Insert the battery pack, and close the cover. Insert the battery pack with the v mark facing toward the battery compartment as illustrated above. Make sure the battery pack is properly inserted, then close the cover. • While pushing the battery eject lever down using the front edge of the battery pack, you can easily insert the battery pack. Jack cover DC plug 3 AC power adaptor , Open the jack cover, and connect the AC-LS1A AC power adaptor (supplied) to the DC IN jack of the camera. Connect the plug with the v mark facing up. • Do not short the DC plug on the AC power adaptor with a piece of metal. This may cause a malfunction. • Clean the DC plug of the AC power adaptor with a dry cotton bud. Do not use the dirty plug. Use of the dirty plug may not properly charge the battery pack. 10