Sony DSC P9 Operating Instructions - Page 58

Before operation Set [MOVING IMAGE] to [MULTI BURST] in the SET UP settings (pages 50, 92). Control button MENU Mode dial Shutter button a Set the mode dial to . b Press MENU. The menu appears. c Select (INTERVAL) using b/B, then select the desired between-frame interval using v/V. You can choose the between-frame interval from among the following. NTSC: 1/7.5 sec., 1/15 sec., 1/30 sec. PAL: 1/6.3 sec., 1/12.5 sec., 1/25 sec. (For information on NTSC/PAL, see page 91.) 1/30 1/7.5 1/15 1/30 WB INTERVAL d Press the shutter button. 16 frames will be recorded as one image (image size: 1280×960). To delete shot images When using this mode, you cannot delete only certain frames. When you delete images, all 16 of the frames are deleted at the same time. 1 Set the mode dial to . 2 Press MENU and select [DELETE], then press the center z. 3 Select [OK], then press the center z. All of the frames are deleted. • When you play back images recorded in Multi Burst mode, the 16 frames will be played back in order, with a fixed interval between them. • When the images are played back on a computer, the 16 frames you shot will all be displayed at the same time as part of one image. • When Multi Burst images are played back on a camera without the Multi Burst feature, the 16 frames will all be displayed at the same time, as part of one image, just as they are on a computer. • For the number of images that can be recorded, see page 87. • The flash cannot be used. • The date and time cannot be inserted. 58